Subject: We ran the TTC today
From: paul lamar
Date: 3/5/2017, 2:35 PM
To: A10-Me-Earthlink


  Ran great. Fly it in one to a few days. We should have the go pros
  cameras on the rudder and the wing tip.

  Look at the video.

  When you see vapor coming out of the black thing on the top of the
  intake manifold it is 71 inches of Hg.

  That is the pop off valve and the spring can be changed to increase
  maximum boost. It is necessary to keep the turbo boost and  engine
  from running away to over 100 inches of Hg.

  Paul Lamar

  Paul, can you explain to me about the wastegate operation. If the
  preset pop off limit hardware has been removed, and the cable
  operated system installed in it's place, what procedure will the
  pilot have for control, other than watching boost pressure, and
  relieving it with the manual control?

  Steve Carlisle

It never had a pop off or blow off valve when we first got and tested
the engine for almost a year. We added one recently to the intake manifold.

The waste gate is installed on the exhaust manifold.  That was controlled
by a PWM air pressure valve. It was controlled (sort of) by the Motec
computer. That was supposed to kept the waste gate closed some of the time  by
applying manifold pressure to a diaphragm. That was connected to plunger waste
gate valve it self.

We removed that part of it and replaced it with a manual mechanism.

Let me know Steve if you can watch this video. Anybody else for that
matter. It is a mpeg.

Paul Lamar

Paul 
It looks that I am missing something. 
1 psi = 2.036 inches of mercury Hg, 
14.5 psi = 29.52 inches of Mercury. In your table you show 59 Hg   

where does your formula psi = Hg / 2 - 15 come from? 

Rolf Pfeiffer 

The popular  term boost is in psi  is over and above atmospheric. It is what is called gage
pressure. Gage pressure is relative to atmosphere pressure.
The term  is used by all the turbo charged car drag racers.

On the other hand inches of mercury is absolute pressure. Relative to zero.
Used by pilots of aircraft and aircraft engine builders.

Look at the BASIC program equation.   boost = PressHg / 2 -15

It is a rough conversion.

The chart works in reveres.  Put in the boost 2nd column and read the absolute
press in inches of mercury first column. Manifold pressure gages in Hg for aircraft are
expensive. Chinese boost gages in psi  are dirt cheap.

Here is a on line calculator that gives the same result.

http://www.convertunits.com/from/inch+of+mercury/to/pounds+per+square+inch

Can you view the movie Rolf ?

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.