Hi!: I guess this SAE paper 930680 is interesting regarding the
potentials of Protracted Laser Ignition you develop, [not me] but the
issue comes to my mind that any reduction in working surface temperature
would increase the HC in exhaust, by worsening the quenching effect in
combustion chamber corners, and thus, the fuel economy. Do you have
figures for working surface temperatures and emissions for continued
spark ignition systems? [No]
Just the John Deere and your system are not the same.
Catalytic Glow Plugs in the JDTI Stratified Charge Rotary Engine
Paper #: 930680 Published: 1993-03-0 Hixon, D., Burns, K., and
Pfefferle, W., "Catalytic Glow Plugs in the JDTI Stratified Charge
Rotary Engine," SAE Techni930680, 1993, doi:10.4271/930680.
Abstract: A catalytic glow plug was developed for low surface
temperature operation which shows the capability of achieving equivalent
effectiveness as a similar-geometry non-catalytic plug operating at a
higher temperature. The plug was tested in a diesel-fueled version of
the John Deere Technologies International Stratified Charge Rotary
Engine (SCRE), wherein a glow plug can be used as the continuous
ignition source for the pilot injector. The catalytic plug operated the
engine using an indicated surface temperature as much as 275�C colder
than the non-catalytic baseline plug.The catalytic glow plug, by
operating effectively at a lower temperature than a conventional glow
plug, offers the potential for greatly improved durability. Interesting
applications include the SCRE engine, other low compression diesel
engines, alternative fuel diesel engines, gas turbine engines, and
diesel engine cold starting.
Thanks, have a good season, best regards, + Salut
Jose Gros-Aymerich
Madrid, Spain
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.