Subject: Rotrex in reverse as a gear box for a turbo compound
From: paul lamar
Date: 3/28/2017, 7:31 PM
To: A10-Me-Earthlink


Is one turbo enough for a turbo-compound system? In that case, I
guess the size and boost pressure of the turbo depend on how much
power you want to get for the engine.

Jacobo Guimeráns

Correct. You will need a big turbo for a 3 rotor.

Paul Lamar

I guess that a big turbo is also needed for a 4 rotor turbo-compound
engine.

I'm considering adding a supercharger (a Roots type is the main
option) at the intake manifold, but I fear for an increase in fuel
consumption when I'm looking for the opposite. Would you recommend
adding a Roots supercharger at the intake in a turbo-compound system?
What are the benefits and the drawbacks?

Jacobo Guimeráns

Mechanical blowers suck HP and fuel from the engine. Turbo Chargers
use the otherwise waste energy in the exhaust.

Paul Lamar


OK, so no supercharger then. I'll have to look for a nice big turbo
then. But still, I have to figure out a way to connect the turbo to
the e-shaft via gears in order to create the turbo-compound system.

Jacobo Guimeráns


The big problem is the gear box.

Use what is known as a traction drive. No real gears are involved.
There is a company in Sweden that made them for a awhile. It was
called Rotrex. Super high input RPM on the order of 100,000 Low
torque.  A ten to one planet set would give you 10,000 RPM

T = torque To get 50  free HP = 10,000 X T / 5252 50 X 5252 = 10,000
X T so T = 50 X 5252 / 10,000 so T or Torque = 26 foot pounds of
torque. Not much. The shaft from the compressor side of a turbo
charger could be as small as a quarter inch or 6 or 8 mm.

Paul Lamar


To Jakob: If I were you, I'd consider reviewing, as a basis,
elements such as the Wankel Engine, Internal Combustion,
supercharging Wikipedia articles, the SAE.org database, YouTube
videos, and download from the web documents as the Kenichi Yamamoto
and Harry Ricardo books. This will help in making more focused,
narrower scope or spectrum, your doubts, yielding better results.

Good season, regards, Salut †

Jose Gros-Aymerich

Madrid, Spain

I discovered that HKS has also a supercharger very similar to the
Rotrex traction drive. Here's the link:

http://www.hks-power.co.jp/en/product/supercharger/universal_kit/feature.html
<http://www.hks-power.co.jp/en/product/supercharger/universal_kit/feature.html



What do you think about it, Paul?

Jacobo Guimeráns

They must have licensed it from Rotrex.  Either that or the patent
expired.

We had a long discussion about using it in reverse. Remove the
compressor wheel and feed the power out of the front of your turbo
charger with a small shaft and small couplings into the Rotrex out
put shaft. The normal input drive shaft to the rotrex is now  the
output shaft coupled to the e-shaft with multi belts.

This is risky as I don't know if that will work. Could be the
traction drive feature in the Rotrex would not take the torque (as
little as it is) from the turbo charger.

These devices are very expensive.

I would try to find a machine shop and make your own planetary 10:1
gear box. The gears are probably off the shelf.


Here are some dimensions for the Rotrex parts.

Carrier cage OD is 84mm, 3.307 "

gap is 3 mm so that adds up to  .11811

the 90 mm ID annulus 3.5433 ring.

Ring is 7mm thick steel not stainless like I first thought. .27559

Rollers are 40mm OD, 1.574803

30mm long with 1.18102 12mm shafts. .4724409

NSK bearings are light weight #  6001 C3.  C3 means loose. C4 is very
loose.  C1 is tight bearing.

Pulley shaft is 17mm and has a double sealed regular bearing.

Aluminum case is 129 mm OD 5.0787

105 mm ID. 4.1338

Front and back has 106 mm inner  by 122 mm outer radius for mounting
bracket plate.


Here are a bunch of pictures of most of the parts from the Rotrex.

I even had one made at great expense  but I never tested it.

The idea is too problematic. Much more straight forward to just
build a planetary gear box.

Paul Lamar

Hi Paul, what is your opinion on this product,

https://www.youtube.com/watch?v=XqOCxQYziUo

Steve Carlisle

Been around for years. He learned it from us :-)
It is good but they have to get the price down.

Gas is relatively cheap now in the US. Still $5 or $6 dollars a gallon
in Europe. Mostly taxes.

Paul Lamar



The Rotary Engine free News Letter. Powered by Linux. If you want
off the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.