This one is cheaper as it does not involve high temperature matériel for the two
layer rotor.

The air channels are cast into the rotor housing on either side of the spark
plug bosses. Not as much need for direct injection.

The exact size and position could be found by experimenting.


If this turns out to work it will be incredibly simple.

Paul Lamar


The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.