I am also working on the design of the end housings. The rear is
quite simple.
The front end housing must accommodate a water pump. Does anybody
have any preferences for water pumps. 2nd gen or RX8? Or some else
perhaps?
The oil pump with be a dry sump pump with choices of several brands.
Pual Lamar
In regard to your waterpump choice question I would like to comment. If
designing a different front cover, the water pump chosen firstly needs
to meet the flow requirements of the engine. The pulley needs to match
with regard to belt type and width as well as diameter. Then replacement
cost and availabiliry need consideration. Accessability at any location
in firstly N. America and potentially the world should be taken into
consideration. Possibly the pump from a Cummins diesel as installed in
Dodge or Ram trucks would work.
Dale Davies
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.