Subject: Lamar Ducted Fan-aircraft with turbo compound.
From: paul lamar
Date: 4/16/2017, 9:04 PM
To: A10-Me-Earthlink



     This is better than a separate duct around the fan as the fan being
     buried in the fuselage there is less total skin friction drag. It
     won't be as efficient as a prop but it is more efficient than a
     conventional external ducted fan.

     Of course with 650 HP you may not care. It looks like a jet aircraft
     and goes pretty good :-)

     Another advantage is there is no gear box required so that saves 30
     to 50 pounds and about $3,000. The main fan is cheaper and much
     lighter as it is not running at 1400 to 1800 F temperatures so it
     can be made from carbon fiber.

     A further advantage is the simplicity of the turbo compound feature.
     Since no gear box is required this saves weight and money. In fact
     most radiant waste heat from the engine, normally unrecoverable, is
     used to increase the pressure in the duct slightly. Much like an
     after burner.

     It also heats the cockpit.

     This is well  before I wrote the book "How To Cool Your Wankel" so
     some improvements can be made in this cooling system.

     I should have gotten  a patent on this thing but I was way ahead of
     it's optimum time :-)

     I tried to sell it to Southwest Technical Institute but they had no
     vision :-)

     It takes a brilliant engineer to recognize a brilliant engineer :-)

     I may do some 3D's if any one is interested.

     Paul Lamar

     Paul, so ducted fans seem to be popular, maybe you would like this,

     https://www.youtube.com/watch?v=IvAToG7GZPU

     Steve Carlisle

     So are opiates. That does not make them good :-)

     Some of the early swing wing ducted fan airplanes were designed by
     engineers that did not understand the drawbacks of ducted fans.

     Ducted fans in essence increase the diameter of a rotor used to
     generate a lot of low speed thrust at the great expense of
     inefficiency. Ducted fans are high drag when used as horizontal
     propulsion. That is why the Osprey uses large diameter rotors and NOT
     ducted fans.

     The Wright Brothers understood the low speed thrust efficiency of a
     large diameter rotor. In essence they had two of them with just 12
     HP. Remarkably it made their airplanes capably of lifting and flying
     two people with VERY low HP. Years, if not decades, ahead of any
     other airplanes anywhere near such low HP. It is the reason twins
     climb better than single engine airplanes.

     It is the reason we use and 84 inch diameter prop on the TTC.

     Even the vast majority of  $100 electric drones don't use ducted
     fans. They use a lot of motors and props. The relevant term is called
     disk loading. Google.

     https://en.wikipedia.org/wiki/Disk_loading

     Ducted fans are less so if they are buried in a fuselage similar to a
     jet engine. The outer skin of the fuselage has drag and you need that
     skin anyway no mater what.

     A ducted fan at 80% of that of a prop needless to say is still not as
     good as a prop which is already only 80% efficient.

     There is an analogy with an electric motor and a generator. The
     generator is 80% efficient and the motor is 80% efficient. So the
     overall efficiency is .80 times .80 or 64%.

     This is not just a good idea.  It is a LAW of physics. The world
     would be a better place if they started teaching physics in High
     School. Then maybe I would not get such questions :-)

     Paul Lamar

   I would love to see it 3D awesome setup for a faux f15 or something to
   play with


   Kurt Emerson

   The F15 has two engines.  Are you going to build one?
   Are you wealthy? :-)

   Paul Lamar


Paul, I've wondered if the embedded ducted fan, with a "Kitchen" (clam shell) rudder to vector the thrust would be useful in pusher gyro-copter zero speed landings, which are typically done without rudder authority. Your thoughts?
Thanks,
Boyd Thompson

It will take more HP than  a pusher prop.  If it takes no rudder authority to land it
now why would you need it with a blower ?  I assume most gyros use rudder pedals
to control which way they are pointing but I am probably wrong about that..

If that is the case then yes a movable nozzle would provide some direction
control. The mass flow out of the tail pipe would need to equal the mass
flow out of a prop in any event.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.