Subject: Lamar Ducted Fan-aircraft with turbo compound.
From: paul lamar
Date: 4/16/2017, 9:55 PM
To: A10-Me-Earthlink


    This is better than a separate duct around the fan as the fan being
    buried in the fuselage there is less total skin friction drag. It
    won't be as efficient as a prop but it is more efficient than a
    conventional external ducted fan.

    Of course with 650 HP you may not care. It looks like a jet aircraft
    and goes pretty good :-)

    Another advantage is there is no gear box required so that saves 30
    to 50 pounds and about $3,000. The main fan is cheaper and much
    lighter as it is not running at 1400 to 1800 F temperatures so it
    can be made from carbon fiber.

    A further advantage is the simplicity of the turbo compound feature.
    Since no gear box is required this saves weight and money. In fact
    most radiant waste heat from the engine, normally unrecoverable, is
    used to increase the pressure in the duct slightly. Much like an
    after burner.

    It also heats the cockpit.

    This is well  before I wrote the book "How To Cool Your Wankel" so
    some improvements can be made in this cooling system.

    I should have gotten  a patent on this thing but I was way ahead of
    it's optimum time :-)

    I tried to sell it to Southwest Technical Institute but they had no
    vision :-)

    It takes a brilliant engineer to recognize a brilliant engineer :-)

    I may do some 3D's if any one is interested.

    Paul Lamar

    Paul, so ducted fans seem to be popular, maybe you would like this,

    https://www.youtube.com/watch?v=IvAToG7GZPU <https://www.youtube.com/watch?v=IvAToG7GZPU>

    Steve Carlisle

    So are opiates. That does not make them good :-)

    Some of the early swing wing ducted fan airplanes were designed by
    engineers that did not understand the drawbacks of ducted fans.

    Ducted fans in essence increase the diameter of a rotor used to
    generate a lot of low speed thrust at the great expense of
    inefficiency. Ducted fans are high drag when used as horizontal
    propulsion. That is why the Osprey uses large diameter rotors and NOT
    ducted fans.

    The Wright Brothers understood the low speed thrust efficiency of a
    large diameter rotor. In essence they had two of them with just 12
    HP. Remarkably it made their airplanes capably of lifting and flying
    two people with VERY low HP. Years, if not decades, ahead of any
    other airplanes anywhere near such low HP. It is the reason twins
    climb better than single engine airplanes.

    It is the reason we use and 84 inch diameter prop on the TTC.

    Even the vast majority of  $100 electric drones don't use ducted
    fans. They use a lot of motors and props. The relevant term is called
    disk loading. Google.

    https://en.wikipedia.org/wiki/Disk_loading <https://en.wikipedia.org/wiki/Disk_loading>

    Ducted fans are less so if they are buried in a fuselage similar to a
    jet engine. The outer skin of the fuselage has drag and you need that
    skin anyway no mater what.

    A ducted fan at 80% of that of a prop needless to say is still not as
    good as a prop which is already only 80% efficient.

    There is an analogy with an electric motor and a generator. The
    generator is 80% efficient and the motor is 80% efficient. So the
    overall efficiency is .80 times .80 or 64%.

    This is not just a good idea.  It is a LAW of physics. The world
    would be a better place if they started teaching physics in High
    School. Then maybe I would not get such questions :-)

    Paul Lamar

   I would love to see it 3D awesome setup for a faux f15 or something to play with


   Kurt Emerson

   The F15 has two engines.  Are you going to build one?
   Are you wealthy? :-)

   Paul Lamar


They already have the pj2 dreamer using a heavy ls v8 turning 400 hp (if you havent seen it, it has the ls centrally located turning a gearbox splitting the output to two fans one in each intake/duct/exhaust) Mr Lamars rotary should beat that hands down all day long

http://www.dreameravia.com/power-plant


Rob Miller


Two fans is good with one engine. For the same reason the Wright Bros used it :-)

That thing is pretty heavy at 2000 pound  for only 26 foot wing span. They don't say what kind
of composite? Our TTC weighs 1000 pounds.

The 500 pound engine does not help. I don't care what they claim that
engine has a life expectancy of less than 3 hours at 6000 RPM and 400 HP


I would use cog belts to drive the fans.

I would not risk my money sending it to Russia :-)

Paul Lamar

    The Rotary Engine free News Letter. Powered by Linux. If you want off
    the list PLEASE let me know and I will remove  you.  ACRE NL web
    site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
    Copyright 1998-2017 All world wide rights reserved.