This is better than a separate duct around the fan as the fan being
buried in the fuselage there is less total skin friction drag. It
won't be as efficient as a prop but it is more efficient than a
conventional external ducted fan.
Of course with 650 HP you may not care. It looks like a jet aircraft
and goes pretty good :-)
Another advantage is there is no gear box required so that saves 30
to 50 pounds and about $3,000. The main fan is cheaper and much
lighter as it is not running at 1400 to 1800 F temperatures so it
can be made from carbon fiber.
A further advantage is the simplicity of the turbo compound feature.
Since no gear box is required this saves weight and money. In fact
most radiant waste heat from the engine, normally unrecoverable, is
used to increase the pressure in the duct slightly. Much like an
after burner.
It also heats the cockpit.
This is well before I wrote the book "How To Cool Your Wankel" so
some improvements can be made in this cooling system.
I should have gotten a patent on this thing but I was way ahead of
it's optimum time :-)
I tried to sell it to Southwest Technical Institute but they had no
vision :-)
It takes a brilliant engineer to recognize a brilliant engineer :-)
I may do some 3D's if any one is interested.
Paul Lamar
Paul, so ducted fans seem to be popular, maybe you would like this,
https://www.youtube.com/watch?v=IvAToG7GZPU
<https://www.youtube.com/watch?v=IvAToG7GZPU>
<
https://www.youtube.com/watch?v=IvAToG7GZPU
<https://www.youtube.com/watch?v=IvAToG7GZPU>>
Steve Carlisle
So are opiates. That does not make them good :-)
Some of the early swing wing ducted fan airplanes were designed by
engineers that did not understand the drawbacks of ducted fans.
Ducted fans in essence increase the diameter of a rotor used to
generate a lot of low speed thrust at the great expense of
inefficiency. Ducted fans are high drag when used as horizontal
propulsion. That is why the Osprey uses large diameter rotors and NOT
ducted fans.
The Wright Brothers understood the low speed thrust efficiency of a
large diameter rotor. In essence they had two of them with just 12
HP. Remarkably it made their airplanes capably of lifting and flying
two people with VERY low HP. Years, if not decades, ahead of any
other airplanes anywhere near such low HP. It is the reason twins
climb better than single engine airplanes.
It is the reason we use and 84 inch diameter prop on the TTC.
Even the vast majority of $100 electric drones don't use ducted
fans. They use a lot of motors and props. The relevant term is called
disk loading. Google.
https://en.wikipedia.org/wiki/Disk_loading
<https://en.wikipedia.org/wiki/Disk_loading>
<
https://en.wikipedia.org/wiki/Disk_loading
<https://en.wikipedia.org/wiki/Disk_loading>>
Ducted fans are less so if they are buried in a fuselage similar to a
jet engine. The outer skin of the fuselage has drag and you need that
skin anyway no mater what.
A ducted fan at 80% of that of a prop needless to say is still not as
good as a prop which is already only 80% efficient.
There is an analogy with an electric motor and a generator. The
generator is 80% efficient and the motor is 80% efficient. So the
overall efficiency is .80 times .80 or 64%.
This is not just a good idea. It is a LAW of physics. The world
would be a better place if they started teaching physics in High
School. Then maybe I would not get such questions :-)
Paul Lamar
I would love to see it 3D awesome setup for a faux f15 or
something to play with
Kurt Emerson
The F15 has two engines. Are you going to build one?
Are you wealthy? :-)
Paul Lamar
They already have the pj2 dreamer using a heavy ls v8 turning 400
hp (if you havent seen it, it has the ls centrally located turning a
gearbox splitting the output to two fans one in each
intake/duct/exhaust) Mr Lamars rotary should beat that hands down all
day long
http://www.dreameravia.com/power-plant
<http://www.dreameravia.com/power-plant>
Rob Miller
Two fans is good with one engine. For the same reason the Wright
Bros used it :-)
That thing is pretty heavy at 2000 pound for only 26 foot wing
span. They don't say what kind
of composite? Our TTC weighs 1000 pounds.
The 500 pound engine does not help. I don't care what they claim that
engine has a life expectancy of less than 3 hours at 6000 RPM and
400 HP
I would use cog belts to drive the fans.
I would not risk my money sending it to Russia :-)
Paul Lamar
That was my belief, build it lighter, use a higher hp lighter rotary,
and maybe make the wings a smidge bigger. I do like your idea of using
cog tooth belts, maybe run two that are running both fans in case one
fails you have a back up. Although I was looking at a cogtooth belt psru
lile ben haas and after researching (aka google search) Goodyear makes
a 750 hp continuous rated 3 inch belt, I would think this would be more
than adequate with a fairly large safety margin. Mr haas did say that
belt alignment and proper anchoring or the pully and rigidity of the
mounting plate was critical (his ford stroker v8, 400hp in his maul
deformed his for 1/2 plate due to torque, I believe he changed it to a
3/4 plate with great success) the last I read, he was over 1k hours
without a failure, and was 40 lbs lighter than a io540 including an
inflight adjustable electric prop. Another design I saw (i have the
picture, I think from this newsletter actually) a split Y two intakes,
with and ls engine in the "crotch" of the Y with a single fan and
exhaust. Again, Mr Lamars rotary would be leaps and bounds better for
this set up I believe.
I'm still looking for the website I got these from but the engine is
centrally located and the props and the small wings are all that moves
Found the picture
Rob Miller
You guys are doing all this for looks. They are not going to be real
fast and 15 gallons an hour is a lot. My C182 only burns about 11 GPH
but hauls almost a 1000 pounds.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.