Subject: Lamar Ducted Fan-aircraft with turbo compound.
From: paul lamar
Date: 4/17/2017, 12:04 PM
To: A10-Me-Earthlink


   This is better than a separate duct around the fan as the fan being
   buried in the fuselage there is less total skin friction drag. It
   won't be as efficient as a prop but it is more efficient than a
   conventional external ducted fan.

   Of course with 650 HP you may not care. It looks like a jet aircraft
   and goes pretty good :-)

   Another advantage is there is no gear box required so that saves 30
   to 50 pounds and about $3,000. The main fan is cheaper and much
   lighter as it is not running at 1400 to 1800 F temperatures so it
   can be made from carbon fiber.

   A further advantage is the simplicity of the turbo compound feature.
   Since no gear box is required this saves weight and money. In fact
   most radiant waste heat from the engine, normally unrecoverable, is
   used to increase the pressure in the duct slightly. Much like an
   after burner.

   It also heats the cockpit.

   This is well  before I wrote the book "How To Cool Your Wankel" so
   some improvements can be made in this cooling system.

   I should have gotten  a patent on this thing but I was way ahead of
   it's optimum time :-)

   I tried to sell it to Southwest Technical Institute but they had no
   vision :-)

   It takes a brilliant engineer to recognize a brilliant engineer :-)

   I may do some 3D's if any one is interested.

   Paul Lamar

   Paul, so ducted fans seem to be popular, maybe you would like this,

   https://www.youtube.com/watch?v=IvAToG7GZPU

   Steve Carlisle

   So are opiates. That does not make them good :-)

   Some of the early swing wing ducted fan airplanes were designed by
   engineers that did not understand the drawbacks of ducted fans.

   Ducted fans in essence increase the diameter of a rotor used to
   generate a lot of low speed thrust at the great expense of
   inefficiency. Ducted fans are high drag when used as horizontal
   propulsion. That is why the Osprey uses large diameter rotors and NOT
   ducted fans.

   The Wright Brothers understood the low speed thrust efficiency of a
   large diameter rotor. In essence they had two of them with just 12
   HP. Remarkably it made their airplanes capably of lifting and flying
   two people with VERY low HP. Years, if not decades, ahead of any
   other airplanes anywhere near such low HP. It is the reason twins
   climb better than single engine airplanes.

   It is the reason we use and 84 inch diameter prop on the TTC.

   Even the vast majority of  $100 electric drones don't use ducted
   fans. They use a lot of motors and props. The relevant term is called
   disk loading. Google.

   https://en.wikipedia.org/wiki/Disk_loading


   Ducted fans are less so if they are buried in a fuselage similar to a
   jet engine. The outer skin of the fuselage has drag and you need that
   skin anyway no mater what.

   A ducted fan at 80% of that of a prop needless to say is still not as
   good as a prop which is already only 80% efficient.

   There is an analogy with an electric motor and a generator. The
   generator is 80% efficient and the motor is 80% efficient. So the
   overall efficiency is .80 times .80 or 64%.

   This is not just a good idea.  It is a LAW of physics. The world
   would be a better place if they started teaching physics in High
   School. Then maybe I would not get such questions :-)

   Paul Lamar

            I would love to see it 3D awesome setup for a faux f15 or
   something to play with


            Kurt Emerson

            The F15 has two engines.  Are you going to build one?
            Are you wealthy? :-)

            Paul Lamar


        They already have the pj2 dreamer using a heavy ls v8 turning 400
   hp (if you havent seen it, it has the ls centrally located turning a
   gearbox splitting the output to two fans one in each
   intake/duct/exhaust) Mr Lamars rotary should beat that hands down all
   day long

        http://www.dreameravia.com/power-plant


        Rob Miller


        Two fans is good with one engine. For the same reason the Wright
   Bros used it :-)

        That thing is pretty heavy at 2000 pound  for only 26 foot wing
   span. They don't say what kind
        of composite? Our TTC weighs 1000 pounds.

        The 500 pound engine does not help. I don't care what they claim that
        engine has a life expectancy of less than 3 hours at 6000 RPM and
   400 HP


         I would use cog belts to drive the fans.

        I would not risk my money sending it to Russia :-)

        Paul Lamar

   That was my belief, build it lighter, use a higher hp lighter rotary,
   and maybe make the wings a smidge bigger. I do like your idea of using
   cog tooth belts, maybe run two that are running both fans in case one
   fails you have a back up. Although I was looking at a cogtooth belt psru
   lile ben haas and after researching  (aka google search) Goodyear makes
   a 750 hp continuous rated 3 inch belt, I would think this would be more
   than adequate with a fairly large safety margin. Mr haas did say that
   belt alignment and proper anchoring or the pully and rigidity of the
   mounting plate was critical  (his ford stroker v8, 400hp in his maul
   deformed his for 1/2 plate due to torque, I believe he changed it to a
   3/4 plate with great success) the last I read, he was over 1k hours
   without a failure, and was 40 lbs lighter than a io540 including an
   inflight adjustable electric prop. Another design I saw (i have the
   picture, I think from this newsletter actually) a split Y two intakes,
   with and ls engine in the "crotch" of the Y with a single fan and
   exhaust. Again, Mr Lamars rotary would be leaps and bounds better for
   this set up I believe.

   I'm still looking for the website I got these from but the engine is
   centrally located and the props and the small wings are all that  moves

   Found the picture

   Rob Miller

   You guys are doing all this for looks. They are not going to be real
   fast and 15 gallons an hour is a lot. My C182 only burns about 11 GPH
   but hauls almost a 1000 pounds.

   Paul Lamar

Thanks, Paul. Cool idea on the stater motor thruster. Thanks, again.

Boyd Thompson

Or maybe a 45 degree pivot so it will work with or
without thrust from the propulsion prop. If it is not effective
enough on landing just increase the area.

Paul Lamar

   The Rotary Engine free News Letter. Powered by Linux. If you want off
   the list PLEASE let me know and I will remove  you.  ACRE NL web
   site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
   Copyright 1998-2017 All world wide rights reserved.