Subject: World exclusive: Rotary returns | MCN
From: paul lamar
Date: 4/20/2017, 9:20 PM
To: A10-Me-Earthlink


http://www.motorcyclenews.com/news/2017/april/norton-rotron-200-bhp-race-bike/



Phillip R. Hinds
George Town TAS

This really exciting.


One of the companies that had the official Wankel name in their title published
a technical paper on water cooled Wankel e-shafts. Could be GMBH.

I don't think Brian Crighton from the link above invented water cooled e-shafts.
The e-shaft is robust enough to be hollowed out for the cooling water.

Here is some info from the paper. The  pdf is too big right at the moment but
I will reduce the size when I get some time.

I was convinced. A water cooled e-shaft can make up some of the
drawbacks to charge cooling. Probably still not as good as an oil
cooled rotor but a lot better then plain charge cooling. I am glad some one
tried it.

Hats off to Brian Crighton. It appears to work.

BTW notice the width of the rotor. That is the other major change and
opens up avenues to do further research on the windy combustion chamber.
Not only that but in theory it will allow higher RPM as the rotor bearing
functioning is enhanced.

Side by side plugs are a good idea.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.