http://www.motorcyclenews.com/news/2017/april/norton-rotron-200-bhp-race-bike/
Phillip R. Hinds
George Town TAS
This really exciting.
One of the companies that had the official Wankel name in their title
published a technical paper on water cooled Wankel e-shafts. Could be GMBH.
I don't think Brian Crighton from the link above invented water cooled
e-shafts.
The e-shaft is robust enough to be hollowed out for the cooling water.
Here is some info from the paper. The pdf is too big right at the
moment but I will reduce the size when I get some time.
I was convinced. A water cooled e-shaft can make up some of the
drawbacks to charge cooling. Probably still not as good as an oil cooled
rotor but a lot better then plain charge cooling. I am glad some one
tried it.
Hats off to Brian Crighton. It appears to work.
BTW notice the width of the rotor. That is the other major change and
opens up avenues to do further research on the windy combustion chamber.
Not only that but in theory it will allow higher RPM as the rotor
bearing functioning is enhanced.
Side by side plugs are a good idea.
Paul Lamar
Interesting concept! But we might note that "GMBH" is equal to
"Incorporated" or similar, and not a company name.
Best,
Herb Karchek
Yes of course. There were multiple companies called Wankel. Each one was
organized differently.
This happened as the rights to the Wankel name changed hands.
The current one is called AG.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.