Subject: World exclusive: Rotary returns | MCN
From: paul lamar
Date: 4/24/2017, 10:03 PM
To: A10-Me-Earthlink


http://www.motorcyclenews.com/news/2017/april/norton-rotron-200-bhp-race-bike/

Phillip R. Hinds
George Town TAS

This really exciting.


One of the companies that had the official Wankel name in their title
published a technical paper on water cooled Wankel e-shafts. Could be GMBH.

I don't think Brian Crighton from the link above invented water cooled
e-shafts. The e-shaft is robust enough to be hollowed out for the
cooling water.

Here is some info from the paper. The  pdf is too big right at the
moment but I will reduce the size when I get some time.

I was convinced. A water cooled e-shaft can make up some of the
drawbacks to charge cooling. Probably still not as good as an oil cooled
rotor but a lot better then plain charge cooling. I am glad some one
tried it.

Hats off to Brian Crighton. It appears to work.

BTW notice the width of the rotor. That is the other major change and
opens up avenues to do further research on the windy combustion chamber.
Not only that but in theory it will allow higher RPM as the rotor
bearing functioning is enhanced.

Side by side plugs are a good idea.

Paul Lamar

Interesting concept! But we might note that "GMBH" is equal to
"Incorporated" or similar, and not a company name.
Best,
Herb Karchek

Yes of course. There were multiple companies called Wankel. Each one was
organized differently.
This happened as the rights to the Wankel name changed hands.

The current one is called AG.

Paul Lamar

Hi!: besides the SAE paper about 'Lightweight rotary engine', the shaft
of OMC Wankels, at least of those delivering 45 HP, is fully hollow,
this allowing using a Citroen 2CV oil pump and radiator to keep it cool,
easy to say, not so much to implement; reports from snowmobile users
pointed a too hot bearing during hot weather with soft snow, even making
engine stick [seize?], besides some solid lubricants in mix, as MoS2, cooling the
shaft inside may help prevent this, also the OMC secondary peripheral
port throttle sometimes entered the working chamber, totally destroying
engine.

Comments?

Best regards, + Salut

 Jose Gros-Aymerich

 Madrid, Spain


The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.