Subject: Add 2 Stroke Oil to Gas
From: paul lamar
Date: 5/3/2017, 8:30 PM
To: A10-Me-Earthlink



   Bought a 1989 RX-7 - You suggest adding 2 stroke oil to gas - How much
   per gallon ?
   Plan to drive it for a while and then use the engine in a homebuilt -
   Roland Friestad


   Good idea. A car that old the nylon lines feeding oil to the apex seal are brittle.

   2 Oz per gallon will do it. Walmart sells it by the gallon.

   Paul Lamar

Rotors magazine (a YouTube channel for people who run rotarys in cars) recommend premixing at the rate Paul said 2oz per gallon with the caveat a little less is ok of your not running, with a little more if your running hard. One of the reasons is that the fuel injector has a wider spray path than the stock oil injectors, and supposedly better lubricates the engine. Also, your not using engine oil for lubrication the engine has a supply of clean oil. I don't know enough about the engines (yet) so I wasn't sure about that last part. I'm sure Mr Lamar knows, and if that would be applicable for aircraft use.

Rob Miller



   The Rotary Engine free News Letter. Powered by Linux. If you want off
   the list PLEASE let me know and I will remove  you.  ACRE NL web
   site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
   Copyright 1998-2017 All world wide rights reserved.