Hi Paul, we have had a couple of Visions built at Serpentine. One had a Subaru engine, reg VH WRX, and flew OK, though the airframe was a bit heavy. The other is still under construction and has 6 inches added to the cabin height as the builder is about 6’6” tall. Rs, Dave McCandless  in Perth

Dave: You don't have contact with the builders or possible contact details of the flyable version of the Vision.?The builders group is not a very active and only a small group sharing there experience.
Will contact you in private for the details. Forgive me Paul for reaching out on this group ,as to get hold of our family of builders. Much appreciated.

Le Roux Breytenbach

The Internet  and this  newsletter never seizes to amaze me. Le Roux and Dave are just across the Indian ocean from each other. And I am on the exact opposite side of the globe :-)

You guys can use the newsletter. I am sure there may be one or two more Visions being built on here.

Paul Lamar

     Hi Paul and Le Roux,
     Nice Depiction of the Oceans.
     Give me a day or two and maybe I can get some pics.
     The guy who built the flyer has passed away, but the airplane is still
     around.
     Rs,

     Dave McCandless  in Perth

I have Vision plans. But I've never had the time to actually build it.

David Mikesell
San Jose, California

Are the wings hot wired foam David?

----------------------------------------------------------------------

Back in 2011 Pierre Swanepoel from S. Afica (I think) was building a 13b powered vision.
Here are some 3D's and pictures

Paul: This is my firewall dimensions for the Vision Ex.After these drawings and the new universal engine mount the following.

Can you help with new drawings for my 13B with the (universal mount)
With dry sump engine 90 degree turn(plugs up mount)
Must I move the engine mount points from the current position inwards to have the side-rad to fit in under the cowl

Thanks Le Roux Breytenbach




The Vision is a plans build plane from the USA state IL Pro-Composites Scott VanderVeen is the owner of the company.

pro-composites.com <http://pro-composites.com

3D's by Paul Lamar.

Le Roux Breytenbach



     The Rotary Engine free News Letter. Powered by Linux. If you want off
     the list PLEASE let me know and I will remove  you.  ACRE NL web
     site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
     Copyright 1998-2017 All world wide rights reserved.