Paul, what year rotary engine would be the best choice to get 300-350 hp with turbo charging (for an airplane)? I am looking for a complete running unit. -jw


   James Whitehurst

   Anything after 1989. Best to get a running car. Then you can do a compression check.
   Before 2004 the nylon lines that feed oil to the apex seals get brittle and some times
   crack. If the engine is running however you can do a compression check and
   if that is OK the engine is fine.

   2004, 2005 RX8 suffered from the same problem as Mazda cut back too far
   on the apex seal oil for smog reasons. Mazda gave people a new engine.


   My 2004 is still running great as i always put in an extra one ounce per gallon
    of 2 cycle each time i filled the tank from day one.

   About 2006 Mazda fixed it with three oil injectors per rotor and a bit more
   apex seal oil. Some early RX8 computers were re flashed to increase the oil.

   Now if you don't mind learning how to take them apart you can get a real
   old junker and practice taking it apart and putting it back together.

   It is real easy once you do it once. Lots of Video's on how to do it on youtube.

   Then you can put in 20,000 hour life silicon nitride apex seals. About $1200 to
   $1500 for a set. It will run long after you die if you are now 20 years old :-)
   Assuming you are consistent about mixing 2 ounces of apex seal oil per gallon
   of fuel.

   Here are some picture of an aircraft with a side port turbo I did.

   Paul Lamar

James,
Even the obsolete 10A engines with a turbo will put out that HP. In the early racing days for Mazda the 10A engines in RX3's made 270HP with the Mazda Factory Race rotor housings and destroyed Nissan's 50th straight victory in the 2L GT-R that was highly developed. Parts for 10A engines are virtually inpossible to find now. The 12A is also obsolete and parts are getting difficult to find. The RX7 13B engines and RX8 engines are the way to go at this time. Something to take note of is the gact that automotive tubochargers in OEM application do not make great AC turbochargers. It is the difference in duty cycle that creates the troubles. Housings with a larger A/R are required. Otherwise the turbo is not likely to last long.

Dale Davies



   The Rotary Engine free News Letter. Powered by Linux. If you want off
   the list PLEASE let me know and I will remove  you.  ACRE NL web
   site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
   Copyright 1998-2017 All world wide rights reserved.