Subject: Look for the Brian Ingraham post on BD4
From: paul lamar
Date: 6/7/2017, 1:55 PM
To: A10-Me-Earthlink



    Looks like Jim is Back in business.

    http://www.bedecorp.com/

    Matt Naiva

    Must having been selling parts for awhile to come up with the money
    to move to Florida. Looks like a nice shop. The builders assistance is
    probably a good business as people have invested a lot of time
    and  money in a project and it is not worth much until it is flying.

    Paul Lamar

    Jim Jr. is still here.....Jim is gone!

    Lynn E. Hanover

    Hi Paul,


    Heres some stuff on the BD4. I flew Don Phillips BD4(N11DV) back in the
    mid 80's when I was living in San Jose and flying out of Reid Hillview
    airport. It was absolutely beautiful, Don was a perfectionist machinist
    and it showed.


    >From memory it had an 0360 Lycoming and flew well. It was NOT a rocket
    ship. One of Don's concerns was that he traveled to Nevada frequently
    (finally moving to Dayton NV)and getting across the Sierras was an
    issue. Don mentioned that he thought the service ceiling was a bit less
    than 10,000ft, possibly due to the airfoil section, a NACA 64-415. Is
    the airfoil still the same, or has it been replaced with a more
    efficient one ?  If this airplane is so wonderful, why are there not
    more of them around?


http://www.kolotv.com/home/headlines/One-Dead-in-Dayton-Plane-Crash-261749811.html


    http://old.bd-4.org/archive.html <http://old.bd-4.org/archive.html>

    Russ Ward

    "If this airplane is so wonderful, why are there not more of them
around?"

    You can lead a horse to water but you cannot make him drink :-)

    My guess is  half the people in the world are logic and reason
    challenged :-)

    Was the Lyc O-360 150 HP? That is a bit marginal. A C172 won't get
much over
    14.000 feet.  I had 4 people in a Piper Cherokee in Alaska and I had a
    heck of a time
    climbing over 12,000 Feet. I had to get over the mountains between
    Valdez and Anchorage.
     Nobody was over weight.

    My C182 is a bit better with 230 HP.

    All that is not a problem if you boost your Wankel to two atmospheres.
    Think about that.

    Paul Lamar


    Paul,

    This bd4 w/turbo rotary sounds very interesting. How much interior room
     compared to a182?  Old version and stretched bd4?

    Van Van

    I would say it is about like a C172. Maybe a bit smaller.

    Paul Lamar


Paul,
Seen many but never flown in 172.  Put 100 hrs on 182 in less than month
rodeoing when my Bonanza was broke. Is 172 narrower than 182 or just
shorter. Do u think bd4c (stretched 18 in i think) would be close to 182
cab in length.  Turboed rotary in tail dragger bd4 could takeoff
straight up.  So if not too cramped, would be world beater with that
economical cruise.  Wonder if could put hubs on outside of main gear so
could put ballon tires on for bush?
Van Van

Narrower. Probably bit shorter as well. Stretching it might work but it
would be risky
from a structural point of view. I don't see any problems with balloon
tires but
the speed and MPG would be affected.

I like my high speed bush plane idea for that.
Here are the 3D's

Paul Lamar

Hi Paul,


I don't think I've ever seen a 150hp O360. It was 180hp.

From memory, it was the airfoil section that was not up to scratch. Perhaps a more modern day Riblett would fix it..

Russ Ward


It is certainly is 150 HP at 12,000 feet or less. The wing is not near stall so the airfoil
has nothing to do with it.

It is a HP issue at high  altitude.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.