Subject: Look for the Brian Ingraham post on BD4
From: paul lamar
Date: 6/7/2017, 2:08 PM
To: A10-Me-Earthlink



       Looks like Jim is Back in business.

       http://www.bedecorp.com/

       Matt Naiva

       Must having been selling parts for awhile to come up with the money
       to move to Florida. Looks like a nice shop. The builders assistance is
       probably a good business as people have invested a lot of time
       and  money in a project and it is not worth much until it is flying.

       Paul Lamar

       Jim Jr. is still here.....Jim is gone!

       Lynn E. Hanover

       Hi Paul,


       Heres some stuff on the BD4. I flew Don Phillips BD4(N11DV) back in the
       mid 80's when I was living in San Jose and flying out of Reid Hillview
       airport. It was absolutely beautiful, Don was a perfectionist machinist
       and it showed.


       >From memory it had an 0360 Lycoming and flew well. It was NOT a rocket
       ship. One of Don's concerns was that he traveled to Nevada frequently
       (finally moving to Dayton NV)and getting across the Sierras was an
       issue. Don mentioned that he thought the service ceiling was a bit less
       than 10,000ft, possibly due to the airfoil section, a NACA 64-415. Is
       the airfoil still the same, or has it been replaced with a more
       efficient one ?  If this airplane is so wonderful, why are there not
       more of them around?


http://www.kolotv.com/home/headlines/One-Dead-in-Dayton-Plane-Crash-261749811.html <http://www.kolotv.com/home/headlines/One-Dead-in-Dayton-Plane-Crash-261749811.html>

       http://old.bd-4.org/archive.html <http://old.bd-4.org/archive.html> <http://old.bd-4.org/archive.html <http://old.bd-4.org/archive.html>>

       Russ Ward

       "If this airplane is so wonderful, why are there not more of them around?"

       You can lead a horse to water but you cannot make him drink :-)

       My guess is  half the people in the world are logic and reason
       challenged :-)

       Was the Lyc O-360 150 HP? That is a bit marginal. A C172 won't get much over
       14.000 feet.  I had 4 people in a Piper Cherokee in Alaska and I had a
       heck of a time
       climbing over 12,000 Feet. I had to get over the mountains between
       Valdez and Anchorage.
        Nobody was over weight.

       My C182 is a bit better with 230 HP.

       All that is not a problem if you boost your Wankel to two atmospheres.
       Think about that.

       Paul Lamar


       Paul,

       This bd4 w/turbo rotary sounds very interesting. How much interior room
        compared to a182?  Old version and stretched bd4?

       Van Van

       I would say it is about like a C172. Maybe a bit smaller.

       Paul Lamar


   Paul,
   Seen many but never flown in 172.  Put 100 hrs on 182 in less than month rodeoing when my Bonanza was broke. Is 172 narrower than 182 or just shorter. Do u think bd4c (stretched 18 in i think) would be close to 182 cab in length.  Turboed rotary in tail dragger bd4 could takeoff straight up.  So if not too cramped, would be world beater with that economical cruise.  Wonder if could put hubs on outside of main gear so could put ballon tires on for bush?
   Van Van

   Narrower. Probably bit shorter as well. Stretching it might work but it would be risky
   from a structural point of view. I don't see any problems with balloon tires but
   the speed and MPG would be affected.

   I like my high speed bush plane idea for that.
   Here are the 3D's

   Paul Lamar

Thx Paul.  Yes.  I've been folliwing your bush plane plans.  Looks great.  I'm just thinking for a real (comparatvely) cheap 4 place taildragger bush plane if it isn't too cramped, it would run the socks off the old 180 i had (forgot about that and owned it 3 yrs) with turbo rotary, wheel pants and small tires and put that same 180 to shame with big tires and no oants for bush.  Same for a Maule, or other 4 plsce etc.  If 700 out thrre seems like real practical quick fix to multipurpose plane.  Btw I guess i got impression somewhere that the C model bd4 was stretched 18 in.   But I've bored everyone enough with this line so I'll let it go.  But I'm sure going to mull this over more.  Who knows.

Van Van


   The Rotary Engine free News Letter. Powered by Linux. If you want off
   the list PLEASE let me know and I will remove  you.  ACRE NL web
   site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
   Copyright 1998-2017 All world wide rights reserved.