Subject: New gear box hub.
From: paul lamar
Date: 6/9/2017, 7:54 PM
To: A10-Me-Earthlink




       Rather than a traditional steel  SAE prop flange the new gear box would
       have this hub.

       The prop hub and shaft flange are combined.

       Saves weight and cost and the pitch is ground adjustable.

       Paul Lamar

       Paul,

       What length of prop would this work with, and any prop manufacture in mind ?

       George F Curtis


       Warp Drive and Sensinich and an out fit in Oz makes compatible blades.
       Th Oz company name escapes me at the moment.
   Bolly props I think.

         GT Propellers <http://www.gt-propellers.com> - Italian Wood Composite Propellers - P.I.
       Via del Commercio, Riccione (RN) Italy
       Australia sales resentative: chris@gtpropellersaustralia.com.au <mailto:chris@gtpropellersaustralia.com.au>

   The blade hubs are becoming a world wide standard.

   Maximum length I have no idea. Probably the material is a factor.
   I would do extensive testing.


   Paul Lamar

And the MAX horsepower rating is ?

Steve Carlisle

One could do an FEA. Lacking that some testing would have to done.
If one could set up a tilting system that would pitch the tail up and down
at full power by a 2 feet  say once every 30 seconds one could get confidence in
the hub and the prop shaft.

What will happen before that is done is size things just as guess with current
dimensions of Lycoming prop flanges and crankshaft diameters.

The only drawback is a bit more weight.

Paul Lamar


       The Rotary Engine free News Letter. Powered by Linux. If you want off
       the list PLEASE let me know and I will remove  you.  ACRE NL web
       site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
       Copyright 1998-2017 All world wide rights reserved.