What EFI or carb are you planning on using?
Paul Lamar
I have been planning on using Tracy's at this point (purchased years ago),
but would love to have another, more practical EFI solution that does not
involve detailed programming.
Scott Gettings
How close are you to running Scott ?
I would write the program and build the injection hardware.
Are you willing to use an M&W CD ignition?
That greatly simplifies the hardware and software.
Paul Lamar
Hey Paul, what is a M&E cdi ignition?
David Mikesell.
San Jose, CA
M&W not M&E :-)
http://mwignitions.com/
Same as we used on the TTC.
Paul Lamar
Hi Paul,
I will be using a Rotec TBI. They are virtually the same as an Ellison.
I had an Ellison on my Long EZ for over 15yrs without any problems and I
saved
a LOT of fuel over that time period.
Cheers Chris Hoskins.
That is fine and if you use two 40' with p-ports you should get well
over 200
horse power.
Those are copies of the Ellison carb sold in the US for years. The Ellison
patent has expired.
They are not TBI. They are not injection. The air flowing over the
perforated
tube sucks the fuel out of the tiny holes in the tube depending on it's
rotation
angle orientation to the air flow direction. They are very sensitive to
the duct
configuration feeding them air. You are dealing with very low pressure
similar to a venturi type carburetor. The pressure regulator takes the
place
of the float and float bowl. We are talking of pressure way less than
1 psi.
They do indeed work however. So did the Ellison. It was never
clearly established that they were any better than a float carb.
You also must use carb heat as they can ice up.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.