Subject: All you guys wanting gear boxes
From: paul lamar
Date: 6/13/2017, 8:04 AM
To: A10-Me-Earthlink


What EFI or carb are you planning on using?

 Paul Lamar




 I have been planning on using Tracy's at this point (purchased years
 ago), but would love to have another, more practical EFI solution
 that does not involve detailed programming.

 Scott Gettings


 How close are you to running Scott ?

 I would write the program and build the injection hardware.

 Are you willing to use an M&W CD ignition?

 That greatly simplifies the hardware and software.

 Paul

Most likely yes.   I purchased Tracy's EFI but have no problem replacing
it with another, more practical alternative.  Will M&W allow using the stock injectors and coils?

My fuel system is otherwise done.   My plan is to finalize all the
components and wring out the entire pusher configuration in an airboat.
This will avoid having too many new systems to deal with in flight testing.

I'm still searching for the best radiator cores to weld into a folded, cross counterflow unit (4 total of about 15x20x1").  I think the best oil cooler option (considering all your input--thanks!!) is two, appx 5x20x2" units in the lower, rear cowl, fed by under-wing ducts blending into K&L diffusers and exit ducts ending in front of the pusher prop to
assure low pressure.   The other options have structural issues that
prevent their implementation.

So, I think I'm 90% done, but also unfortunately have 90% to go :-)

Scott Gettings

M&W has absolutely nothing to do with the injection system. It does ignition only.

However Tracy's and most other system uses stock inductive  coils. This requires the injection system computer to calculate the correct time to turn the coils on and off when the spark occurs.

Take that software out of the EFI system and it becomes much simpler to control just the injection. A slower, much easier to program, computer will now do the injection work. If one is used per rotor that is even less work for the software.

The software can now act as a black box and record all the engine parameter as often as ten times a second. Of course if one computer fails the engine will still run on the other. The reliability is going to depend on how good the wire connections are made.

Paul Lamar

This what is available in South Africa and has all the features for an rotary engine and the 20B

http://www.402.co.za/index.php?route=product/product&path=17_62&product_id=54

It is called the Rotortech 13B ECU for more or less  US $ 473. plus tax and shipping

Le Roux Breytenbach

Is it open loop or closed loop. You might have to ask.

Paul Lamar


The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.