Subject: Next part in gear box the coupling.
From: paul lamar
Date: 6/14/2017, 10:35 PM
To: A10-Me-Earthlink


   For the simple part NC machining  is kept down to a minimum
   but if cost is no object then about a pound might be saved
   by pocketing from the back slide. Right now the part bolted
   to the e-shaft counter weight is 2.5 pounds.

   The steel  input shaft to the gear box is 1.5 inch in diameter
   and hollow. This has some machining and seal advantages.

   This coupling is attached to the input shaft with extended point 1/4 inch
   set screws. The greatest thing since sliced bread.

   Silicon rubber cushion blocks can be cut with a band saw.

   Kevin, please see how much your NC guy will charge.

   Paul Lamar

How about checking with the YouTube NYC CNC for a quote?

Jim Rudholm

Never heard of them. How does that work?

Paul Lamar

   The Rotary Engine free News Letter. Powered by Linux. If you want off
   the list PLEASE let me know and I will remove  you.  ACRE NL web
   site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
   Copyright 1998-2017 All world wide rights reserved.