Subject: Next part in gear box the coupling.
From: paul lamar
Date: 6/15/2017, 1:24 PM
To: A10-Me-Earthlink


    For the simple part NC machining  is kept down to a minimum
    but if cost is no object then about a pound might be saved
    by pocketing from the back slide. Right now the part bolted
    to the e-shaft counter weight is 2.5 pounds.

    The steel  input shaft to the gear box is 1.5 inch in diameter
    and hollow. This has some machining and seal advantages.

    This coupling is attached to the input shaft with extended point 1/4 inch
    set screws. The greatest thing since sliced bread.

    Silicon rubber cushion blocks can be cut with a band saw.

    Kevin, please see how much your NC guy will charge.

    Paul Lamar

        How about checking with the YouTube NYC CNC for a quote?

        Jim Rudholm

        Never heard of them. How does that work?

        Paul Lamar

    The company name is Sanders Machine.

    https://www.youtube.com/user/saunixcomp/about <https://www.youtube.com/user/saunixcomp/about>

     Jim Rudholm


Paul you may already know, you can buy cast able urethane in different densities for the blocks.

http://www.devcon.com/products/products.cfm?brand=Devcon&cat=Castable%20Urethanes

Steve Carlilse

Silicon rubber is 500 F while Urethane is much less.
A lot of energy goes into those blocks. Energy is heat.

Kevin, here is the IGES on the part. If you don't have Rhino or Solid Works
the NC shop will have those and they can load this file.


Paul Lamar


    The Rotary Engine free News Letter. Powered by Linux. If you want off
    the list PLEASE let me know and I will remove  you.  ACRE NL web
    site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
    Copyright 1998-2017 All world wide rights reserved.