I have an idea for you Scoot.

There is a water jet company in
1500 Airway Circle, New Smyrna Beach FL. 32168 | 386-424-7333

http://www.advmach.com/waterjetcutting.html

I have some drawings of a steel coupling
that can be made out of water jet cut steel
parts.

Then you will need to find a local tig welder to weld it up.

I have some of the parts.
The inner plate that bolts to the counter weight
and the outer ring cut from six inch tubing.

$50 plus mailing.

Use part of Tracy's torque isolator to adapt this to
Tracy's PSRU input shaft. Drill out the rivets and bolt it to
the steel output front plate.

Paul Lamar


The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.