Subject: Making your own steel coupling.
From: paul lamar
Date: 6/20/2017, 1:18 PM
To: A10-Me-Earthlink



  I have an idea for you Scott.

  There is a water jet company in 1500 Airway Circle, New Smyrna Beach
  FL. 32168 | 386-424-7333

http://www.advmach.com/waterjetcutting.html

  I have some drawings of a steel coupling that can be made out of
  water jet cut steel parts.

  Then you will need to find a local tig welder to weld it up.

  I have some of the parts. The inner plate that bolts to the counter
  weight and the outer ring cut from six inch tubing.

  $50 plus mailing.

  Use part of Tracy's torque isolator to adapt this to Tracy's PSRU
  input shaft. Drill out the rivets and bolt it to the steel output
  front plate.

  Paul Lamar




Very interesting!  I can query the water jet shop, and will order these parts if the  shop can make the rest.  No problem with the welder.

How thick is the metal?

Do you intend for an outer ring to be cut into the small curved shapes, or make these from scratch?  I guess  they can be flat instead of curved?

I also assume the 1.78” is the height of each component, so the total thickness would be about 2”?  I will study my redrive to look for areas of potential interference.

Please ignore the curved questions of my last post, sorry. Some of the latter images didn’t display the first time.  I see the connecting elements are square.

Thanks!

Scott Gettings

.050 to .150. Some of the stuff is  .083. You make it out of what you can find :-)
The six inch tubing is about .150 wall.

The total thickness is about 1.8 inches. Nothing about this is critical. One inches
would work if your not shooting for 500 HP.

Ignore those square pictures. The latest are triangular or wedge shaped.
The square ones bottom out corner to corner. We discovered that when
we built the TTC coupling.

If I get a little more interest in this I wall make a tool that bends the wedges in
a hydraulic press. Saves a bit of welding. I have built tools like that in the past.
That would pay off as the same design can be used in new gear boxes.
We already used one of these that was similar in a 3 rotor.

I have not heard back from Kevin so if Kevin finds
an NC shop that can make them out of billet at reasonable cost
that would be more accurate.

In any event once this is welded up it would be wise to balance it between
parallel bars. If your gear box is off the engine please tell me the diameter
of the input spline adapter Tracy is using. The one with all the rivets.
That will control the diameter of the forward plate.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.