Paul
On 06/26/2017 06:08 PM, Steve Thompson wrote:
Yes I do.
A capacitor changes resistance with frequency. At DC it is an
infinite resistance. The higher the frequency, the lower the
resistance. Pulse DC has a frequency, it just doesn't go beyond 0
Volts.
An inductor represents minimum resistance at DC and the resistance
gets greater as the frequency increases.
A resistor represents the same resistance to current flow
regardless of frequency (with the exception of wire-wound resistors
which have a bit of inductive reactance -- that is, they have a bit
more resistance as frequency increases).
As a result of the above, there is something called a choke. It
used to be that one had a resistor of a specific value and then
wrapped it with wire. The wire would behave as a coil (inductor)
and would have more resistance above a certain frequency.
Beyond all this, I can't remember because I haven't worked on
radios, TVs, Juke Boxes, Pinball Machines, etc. for 30+ years.
Regards, Steve Thompson
On 06/26/2017 06:47 PM, paul lamar wrote:
Do we have any one on here that knows the difference between a
resister and a capacitor? :-)
------------------------------------------------
I got more than I expected. Let me narrow it down. Do you have an
engine to run it on soon?
Paul Lamar
Paul:
Apparently I missed some emails because I was just answering the
question of electrical components.
But since you have asked this question, I have a step-son that
works on diesels. He even had a solution that would have allowed
him to rescue the illegal diesels put out by VW. He has a mostly
mechanical injector system. But it does do a bit of detection of
throttle placement, and the like and it has the ability to output
the EPA info. He wasn't willing to go through all the cert
process the EPA wanted -- and since VW, Audi, Mercedes and crew
in Germany have given him a pain, he apparently wasn't interested
in solving their problems. I know enough about programming in
general (I mostly work on IBM Mainframe system where I've been a
developer) that I could have probably fixed the "computer" side
of things -- but it would have meant me "retiring" from my
current position, and I'm not ready to do that.
So his injector systems can be used on pre-TDI engines. And he
has many customers for this. I might add, he also rebuilds turbo
units.
I've talked with him now and then about how to solve the problems
he has and which boards he could use (Raspberry PI, among others).
Regards,
Steve Thompson
The Rotary Engine free News Letter. Powered by Linux. If you want
off the list PLEASE let me know and I will remove you. ACRE NL
web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas Copyright 1998-2017 All world wide
rights reserved.