Subject: Transatlantic crossing by rotary powered aircraft
From: paul lamar
Date: 7/10/2017, 9:32 AM
To: A10-Me-Earthlink




Hi Paul,

Thought you might be interested in this accomplishment – I believe it to
be the first Transatlantic crossing by a rotary powered aircraft. My
good friend Max made it successfully from NY to Austria in his rotary
powered homebuilt.  Here is a link to news on his landing in Austria.

http://salzburg.orf.at/news/stories/2853639/

Best Regards



Edward L. Anderson

I spoke with Max on the phone  when he was in Greenland.
He was freaked out. I think it scared him. He caught a commercial flight and
left the airplane in Greenland. :-)

I may have missed this posting.

Paul Lamar

Paul and all,

Tue, 4 Jul 2017 06:24:17 +0000 (UTC)

   If you have not heard Max Lassacher has finally made it to "Scotland" at last report after having to leave
his Falconair "F12" in "Greenland" for the last nine months after apparently getting water in his fuel when hehad a overnight in "Greenland" last year....


[Apparently a year later]

. A fuel transfer pump problem that was fixed just in time allowed him to fly to directly to "Iceland"......From there he landed in the only airport on the "Faroe Islands" then on to"Scotland"...........Plan is to fly to southern "England" tomorrow...........

Kelly Troyer

More old messages.






Paul, Max Lassacher on the way across the Atlantic to Austria in his

Rotary powered Falconair F12..........Does not have any tracking but

will update his facebook when landing where there is

wi-fi.........He has been flying his F12 since the late 1990's and

was at Osh-Kosh at least once over the years........Left 8:00 am

9/3/16 from "Orange County Airport" Montgomery, NY.........



https://www.facebook.com/maximilian.lassacher



https://www.facebook.com/maximilian.lassacher/videos/pcb.179806562443482/179803469110458/?type=3&theater









https://www.facebook.com/photo.php?fbid=179355985821873&set=a.108550649569074.1073741828.100012424176186&type=3&theater



Kelly Troyer



I have some pictures. These are quite old so I am sure he changed

the cooling system



Paul Lamar





Paul, Max is in Goose Bay , Newfoundland as of Saturday

evening..........Almost 9 hours and one fuel stop........Headed for

Greenland Sunday morning.........E mail to Ed Anderson

Below..........



"Got my survival gear, Flieger is loaded with gas, weather looks

good tail wind Going straight from Goose bay to Greenland 5 hours

over water!



There is a photo of Max's engine on his facebook that I presume is

current..........Go  to the Facebook photo page on the link below

and advance to the next photo.........Engine looks much like the

photos you have.........





https://www.facebook.com/photo.php?fbid=179355985821873&set=a.108550649569074.1073741828.100012424176186&type=3&theater







Kelly Troyer





Looks like he has larger frontal area cores and Kucheman & Weber

diffusers.



Keep all your fingers and toes crossed



-------------------------------------------------------------------------------------









I just spoke with Max on the phone. He is in Narsarsuaq Greenland.

It rained heavy last night and it was left outside, not covered for

a couple of days.



He tried to take off and got about down the fjord aways and

apparently the engine started running rough. He turned around flew

back and landed.



He talked to Ed Anderson and Ed thought it was water in the fuel. I

agree.



Max is not knowledgeable about water in the fuel. It happened to me

a lot flying in Mexico and Alaska. I am surprised. My flight

instructor made me check for water each time I took off.



He needs to get back home so he is taking a weekly commercial flight

today for Iceland and leaving the airplane in Narsarsuaq . He does

not want to get stuck there for a week. He is a bit irrational at

the moment from talking to him



Goose Bay to Narsarsuaq is the longest over water leg so that is the

most dangerous.



From there you fly at  low altitude..... down and up around the

Greenland  coast up to Kulusuk under the ever present overcast. That

gives you a chance to swim or paddle ashore with your personal ELT





Refuel there and then hop over to Iceland.



-------------------------------------------------------------------



Maybe we could land on this road with balloon tires.



This is about 550 miles from Narsarsuaq on the east coast not far

from Kulusuk. Kulusuk is socked in on Google Earth



The range would be no problem as you have enough HP to get off with

100 gallons of fuel. 50 gallons in the wet wing and 25 gallons in

each passenger cabin. 25 gal = 150 pounds.



You can always fly it at best climb speed where the MPG would be

real good.



Paul Lamar





Well he did manage to land, but apparently it has severe turbulence

and winds. I hope he can recover his plane !



Steve Carlisle





Steve i don't get it. What does the wrecked biplane off the end of

the Narsarsuaq runway have to do with  it? It could have been there

for months. We get a crash here at SZP every once in a while. What

goes up is going to come down one way or another



Paul Lamar



Paul research indicates that the landing strip has weather issues, as

indicated by the wrecks, associated with winds and turbulence. It may

be presumptuous for me, but if he has to diagnose engine related

problems, he may be landing and takeing off many times, increasing

his chance for problems. Looks like a Beechcraft StaggerWing ! I hope

he has better luck in the next few weeks!

Steve



I did a little research of my own. The winds and weather are probably

not much different in your neck of the woods and further north in SE

Alaska. Here are some screen shots. I flew SE and the weather is

generally  bad. It was not good getting up to your town either.



The following are some comments by pro ferry pilots.



"Keep in mind there are essentially no alternate airports on the East

Coast of Greenland. If you're unable to land at Kulusuk,  [BGKK] the

nearest alternates are BGSF, BGBW and BIKF. I only fly to BGKK if I

am positively sure that I have enough range to divert to BGSF or

BIKF(Iceland), and in light aircraft I only flight plan to BGKK when

the weather is forecast to be essentially VFR."



"You also need to be able to climb above the Greenland icecap,

minimum 12,000 feet on a calm day and preferably higher. If you

can't achieve a safe altitude over the icecap, you can always fly

BGSF - BGBW - BGKK around the southern tip of Greenland, and sort of

take the scenic route so to speak  "



This report describes the typical weather at the Narsarsuaq Airport

(Narsarsuaq (Narssarssuaq), Greenland) weather station over the

course of an average July. It is based on the historical records from

1986 to 2012. Earlier records are either unavailable or unreliable.



Narsarsuaq (Narssarssuaq) has a polar tundra climate. The area within

25 miles of this station is covered by /tundra/ (67%), /oceans and

seas/ (20%), /shrublands/ (10%), and /lakes and rivers/ (3%).





GD ---- $ GREENLAND currency is DKK (Danish Kroner) EUR 1 ~= DKK

7.45 DK BGGH Gothaab / / 12.50 ck,cc 09/04 DK BGJN Jakobshavn,

Ilulissat /1500 liters available as of May 2005/ 15.00 cc 05/05 DK

BGKK Kulusuk /Avgas Bowser, 22 DKK admin fee/ st 23.25 cc 08/09 DK

BGBW Narsarsuaq /22 DKK admin fee/ 23.35 ca,cc 11/12 DK BGSF

Sondrestrom /Kangerlussuaq (Bowser)/ st 16.85 ck,cc 05/09



Cost of gas and staying there could have influenced Max's decision

to leave.. Gas, Fee's and hotels ($150) are not cheap.



However it does not take long to get rid of the water in fuel. You

can drain it all out and filter in back in with a chamois. (a type

of soft pliable leather now made from sheepskin or lambskin.)



Water goes to the bottom of the bucket so if you siphon it back in

keep the hose away from the bottom



It could have iced up the throttle plates too. There are no FAA carb

heat requirements for fuel injection but I would put it in anyway If

I planned to fly up there.



If I were 30 years younger I would be tempted to go get it



BTW when I fly in Alaska and when it is daylight almost all day if

the weather is good I keep going because tomorrow it will be bad



I suspect Max could have made it to Iceland in 20 hours from Goose

Bay at 160 MPH. Lots of coffee

Paul Lamar



Paul  It seems to me this engine set up is more or less what Tracy did
with his RV

The throttle body is a cut down of the standard RX 7 , and the primary
throttle plate

and barrel removed ,if i am not mistaken.

In such a set up A What type of rpm can you develop if you use the 3.1
redrive

planet and prop say for the falconair f12 in the photo B The dynamic plenum

volume i believe , must be 2,7 more than the volume of the intake
runners ,is this correct?

C Would it be better if the primary intakes (smaller diameter intakes)
would be

on its own throttle plate and chamber in the intake plenum and not been
removed

in the throttle body If you can help me on this

thanks



Le Roux  Breytenbach



Depends on the pitch and the diameter. Mainly the diameter is limited by
the tips

going transonic.



That plenum is a joke. It enhances the torque at 3000 RPM absolutely  where

you don't need it  I explained that to people many many times and
they still did it anyway

I don't think Tracy ever understood it. Certainly not when he used it
for the first time.

Mazda did it because cars need low RPM torque for good acceleration in first

gear. Mazda called it a dynamic chamber.

Airplanes fly on HP and HP is RPM times torque. The more RPM and the
more HIGH RPM torque

the more HP.



You want max torque to happen at 6000 RPM or above. A simple runner 18
to 20 inches

long will give that with a p-port. You will get more HP with out the
dynamic chamber.



If Mazda uses the 16B in the new car it is a partial answer to the car
low RPM torque problem.

Torque is mostly related to engine displacement. The 13B is a small
engine for cars

or airplane engines. It 160 cubic inches while the typical light
aircraft engine

is 320 cubic inches. The 16B will be about 200 cubic inches if they make it.



The torque peak in my  New Dodge (Fiat) stealth motor home MB engine is
at 2000 RPM.

While I am at it I will mention the transmission is a computer controlled

six speed conventional manual transmission. The computer throws the
clutch out and

shifts it with small hydraulic cylinders. Just like a Formula 1 engine



Paul Lamar


The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.