Subject: EFI controllers for P Port
From: paul lamar
Date: 8/10/2017, 5:54 AM
To: A10-Me-Earthlink


Paul,

 

Is there a good choice for EFI controllers for the 2nd gen P Port?

 

Which one could accommodate a MAF sensor?

 

I have place a unit use in Ford V8s in the intake tract,

 

Does TPS work on the P Port?

 

Does Teeing the chambers using the oil spray orifices work with MAP on the P Port?

 

I have an EC-4 single processor unit from Tracy,

 

I just want to get the engine running and have been sorting out wiring sensors.

 

Joe Berki

 

Limo EZ 13b P Port


Tracy's device is designed to use manifold pressure and not MAF sensors.

The only controller that I know about that will use a MAF is the $3000 Motec.
That has very steep learning curve indeed with inadequate documentation.

Megasquirt might work.

Do you know how to program in BASIC?

What is TPS?

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.