Subject: TTC Oxnard landing
From: paul lamar
Date: 8/24/2017, 5:35 PM
To: A10-Me-Earthlink

I finally got openshot installed on my Linux computer.
My favorites video editor of all time.

Here is a low res vid of the TTC landing at Oxnard after
the ferry flight from SZP.

He spent about 5 minutes warming up at SZP.
He got up to about 4500 feet. The oil temp got
to about 170 F with no oil cooler. Max oil pressure
was about 140 psi. Four gallons of oil.

I think the RPM was only 6500. That
tach on the Motec LCD is a bit vague. Max RPM red line is 8500 RPM.
Of course the gear box is 3:1. Total time for the flight
was about 20 minutes.


Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.