Subject: New source for aluminum end housings
From: paul lamar
Date: 8/29/2017, 9:54 PM
To: A10-Me-Earthlink

http://www.pacperformance.com.au/default.aspx

I think they are some where in Melbourne but they keep
their location a secrete.

Quarter mile time  6.263@223mph <https://www.youtube.com/watch?v=g3lvaxQd0G4>

They are getting 1800 HP at 11,000 RPM from a three rotor on methanol.
With side ports. They use side ports for lower RPM torque reasons.
This is drag racing and there are a lot of factors that are irrelevant for aviation use.

Some of the advanced technology we are using in the TTC they do not
use. They use six fuel injectors per rotor..... probably with a 50 psi electric
pump. We use one injector per rotor with a 150 psi mechanical fuel pump
driven off the e-shaft.

There is an article about them in June/July 2017 Race Engine Technology magazine.
A UK publication.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.