http://www.pacperformance.com.au/default.aspx


I think they are some where in Melbourne but they keep their location
a secrete.

Quarter mile time  6.263@223mph <mailto:6.263@223mph

They are getting 1800 HP at 11,000 RPM from a three rotor on
methanol. With side ports. They use side ports for lower RPM torque
reasons. This is drag racing and there are a lot of factors that are
irrelevant for aviation use.

Some of the advanced technology we are using in the TTC they do not
use. They use six fuel injectors per rotor..... probably with a 50
psi electric pump. We use one injector per rotor with a 150 psi
mechanical fuel pump driven off the e-shaft.

There is an article about them in June/July 2017 Race Engine
Technology magazine. A UK publication.

------------------------------------------------------

I found the address and phone number.


PAC PERFORMANCE HQ 2/22 VIOLET ST REVESBY NSW 2212 AUSTRALIA LICENCE
#MVRL52853

PH: 02 9792 7076 FAX: 02 9792 7766 Email us now

<http://www.pacperformance.com.au/contact.aspx


Just off M5 on the way to Parkes from the sydney airport.


Paul Lamar

I saw no mention on their website as to what the wear surface is of
these side plates..........The website photos appear to show a "As
machined surface".........

Kelly Troyer

It slips my mind at the moment, but one of these company's that are
producing cnc end housings, center plates, use steel inserts.

Stevery Carlisle

You also have Billet Inc., based in Australia as well. This is their
website:

http://www.billetinc.com.au/

Jacobo  Guimeráns

The Rotary Engine free News Letter. Powered by Linux. If you want
off the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.