http://www.pacperformance.com.au/default.aspx

I think they are some where in Melbourne but they keep their location
a secrete.

Quarter mile time  6.263@223mph <mailto:6.263@223mph


They are getting 1800 HP at 11,000 RPM from a three rotor on
methanol. With side ports. They use side ports for lower RPM torque
reasons. This is drag racing and there are a lot of factors that are
 irrelevant for aviation use.

Some of the advanced technology we are using in the TTC they do not
use. They use six fuel injectors per rotor..... probably with a 50
psi electric pump. We use one injector per rotor with a 150 psi
mechanical fuel pump driven off the e-shaft.

There is an article about them in June/July 2017 Race Engine
Technology magazine. A UK publication.

------------------------------------------------------

I found the address and phone number.


PAC PERFORMANCE HQ 2/22 VIOLET ST REVESBY NSW 2212 AUSTRALIA LICENCE
#MVRL52853

PH: 02 9792 7076 FAX: 02 9792 7766 Email us now

<http://www.pacperformance.com.au/contact.aspx

Just off M5 on the way to Parkes from the sydney airport.


Paul Lamar

I saw no mention on their website as to what the wear surface is of
these side plates..........The website photos appear to show a "As
machined surface".........

Kelly Troyer

It slips my mind at the moment, but one of these company's that are
producing cnc end housings, center plates, use steel inserts.

Stevery Carlisle


Stevery,

"PRO-MAZ" in Australia markets a billet front housing that uses a
"steel" insert...........I have a question in to them about whether
they anticipate having the center and rear hsgs in the near future
(also the 20B large center hsg)..........

http://promaz.com.au/

Kelly Troyer




Gents, just a small word as Aust was founded on a mob of convicts.
Billet Aust still have reportedly problems with their alloy plates and I
personally had a bitter ending with an attempted deal.  Pac performance
are very good and the price is apparently matching.  Promaz appear to be
good and a sub market is Rotary billet in Brisbane who sell the Promaz
end plates.  Current prices are  $2650 AUD so knock off 20% for USD and
add another $200 min for freight.  Good luck.

Neil Unger




The Rotary Engine free News Letter. Powered by Linux. If you want
off the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.