Paul,  can you post your turbo installation on the TTC engine please?

Second question,  Are the mounting patterns the same for the 13B and
renesis  engines for bellhousings?


Neal Unger

Nothing complicated. Garret GT40 with silicon nitride ball bearings.
Water cooled bearing housing.

Here is a picture of the exhaust manifold. It is Inconel.

The RX 8 bell will bolt to the 13 B but it has an extra bolt at the top,

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.