Paul,  can you post your turbo installation on the TTC engine
 please?

 Second question,  Are the mounting patterns the same for the 13B and
 renesis  engines for bellhousings?


 Neal Unger

 Nothing complicated. Garret GT40 with silicon nitride ball bearings.
 Water cooled bearing housing.

 Here is a picture of the exhaust manifold. It is Inconel.

 The RX 8 bell will bolt to the 13 B but it has an extra bolt at the
 top,

 Paul Lamar

Paul, you missed the turbo p[hoto,

Regards,  Neil Unger



 The Rotary Engine free News Letter. Powered by Linux. If you want
 off the list PLEASE let me know and I will remove  you.  ACRE NL web
 site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2017 All world wide rights reserved.