Subject: New source for aluminum end housings
From: paul lamar
Date: 9/1/2017, 7:30 PM
To: A10-Me-Earthlink


    http://www.pacperformance.com.au/default.aspx
        I think they are some where in Melbourne but they keep
    their location a secrete.

    Quarter mile time  6.263@223mph <mailto:6.263@223mph


   They are getting 1800 HP at 11,000 RPM from a three rotor on methanol.
    With side ports. They use side ports for lower RPM torque reasons.
    This is drag racing and there are a lot of factors that are irrelevant
    for aviation use.

    Some of the advanced technology we are using in the TTC they do not
    use. They use six fuel injectors per rotor..... probably with a 50 psi
    electric
    pump. We use one injector per rotor with a 150 psi mechanical fuel pump
    driven off the e-shaft.

    There is an article about them in June/July 2017 Race Engine Technology
    magazine.
    A UK publication.

    ------------------------------------------------------

    I found the address and phone number.


    PAC PERFORMANCE HQ
    2/22 VIOLET ST REVESBY
    NSW 2212 AUSTRALIA
    LICENCE #MVRL52853

    PH: 02 9792 7076
    FAX: 02 9792 7766
    Email us now

    <http://www.pacperformance.com.au/contact.aspx

    Just off M5 on the way to Parkes from the sydney airport.


    Paul Lamar

       I saw no mention on their website as to what the wear surface is of these side plates..........The website photos
    appear to show a "As machined surface".........

     Kelly Troyer

        It slips my mind at the moment, but one of these company's that are producing cnc end housings, center plates, use steel inserts.

        Steve Carlisle


    Steve,

        "PRO-MAZ" in Australia markets a billet front housing that uses a "steel" insert...........I have a question in to them about
    whether they anticipate having the center and rear hsgs in the near future (also the 20B large center hsg)..........

    http://promaz.com.au/

    Kelly Troyer


    Two piece wide 20B housing available from REC in Calgary, Alberta. Adam is good to deal with.

    Dale Davies

        Need far more details.

        Paul Lamar


    Dale,
       When I inquired about using the "REC" 20B housing in an aircraft engine some time ago
    Adam would not sell it to me ??............

    Kelly Troyer

    Tell them it,s for a air-boat, have someone else buy them, liability scares most business operators, these days.

    Steve Carlisle

    What is the web site steve, NEC.COM <http://NEC.COM> <http://NEC.COM> does not work.

    Paul Lamar


       www.rotaryengine.com <http://www.rotaryengine.com> <http://www.rotaryengine.com>

       Paul, remember, they are Canadian !

       Steve Carlisle


       Yes and that is a real problem for me.
       Don't buy their apex seals.  Strong in an apex seal is not enough.

   Even the ceramic! They are not Iannetti with whisker reinforcement.

       Paul Lamar

Kelly,
Many manufacturers will not sell if they think their product will end up in an aircraft. The worry of liability and being sued scares them off. With the right lawyer, a bolt manufacturer or sales outlet or both could be found liable even if improper installation is indicated.
Get a friend to buy it but do not mention aircraft.

Dale Davies

    The Rotary Engine free News Letter. Powered by Linux. If you want off
    the list PLEASE let me know and I will remove  you. ACRE NL web
    site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
    Copyright 1998-2017 All world wide rights reserved.