Paul,  can you post your turbo installation on the TTC engine
  please?

  Second question,  Are the mounting patterns the same for the 13B and
  renesis  engines for bellhousings?


  Neal Unger

  Nothing complicated. Garret GT40 with silicon nitride ball bearings.
  Water cooled bearing housing.

  Here is a picture of the exhaust manifold. It is Inconel.

  The RX 8 bell will bolt to the 13 B but it has an extra bolt at the
  top,

  Paul Lamar

Paul, you missed the turbo p[hoto,

Regards,  Neil Unger

Here is the GT40 web site link.

https://www.turbobygarrett.com/turbobygarrett/turbochargers/gtx4088r

Attached are the important files.

Paul Lamar

 The Rotary Engine free News Letter. Powered by Linux. If you want
  off the list PLEASE let me know and I will remove  you.  ACRE NL web
  site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
  Copyright 1998-2017 All world wide rights reserved.