Paul,

I ordered 2 RX 8 crank angle sensors and am fabricating a bracket to mount the sensors.

Room is tight due to modified water pump and heat shield for the augmenter.

Could you explain how the Mighty Mite will use the pulse generated by the sensors and the one tit trigger wheel?

The first pulse would be firing ignition by the CDI and the MM would know 20 degrees BTDC,

Does it look for the second pulse to get a time frame for one rev of the Eshaft?

What happens next?

What would the code look like?

Thanks

Joe Berki

There is no code for the CD ignition. The maximite does not need to be involved.

The front rotor (car) fires from the first CAS at 22 degree BTDC. Then the second CAS
180 degrees later fires the rear rotor. That is all there is to it.

That reminds me I need to check and see if I got the sample transformer for the CD system.

Now the CAS can also be connected to the Maximite to fire the injectors after it checks
the mass airflow sensor and figures out the correct pulse width.


Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.