Paul,

No,  the cover is slightly different and the remote water pump has been replaced with the original and a highly modified housing.

I found an old pic with the engine out of the airframe and this was when I was going to use Tracy’s EC-4 single processor box.  This is the same cover that is on there now and would be used for the CDI MaxiMite scenario.

Joe Berki

I see where the water pump belt was interfering.

That will work. You have to move the CAS  counter clockwise that is in there now and make a one tit trigger
plate with slots. and then add the second CAS 180 degrees.

You are getting close.

Do you know how to find top dead center?

Paul Lamar


The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.