Paul,

Can the RX-8 sensors work in a reverse logic scenario?

Use a solid metal trigger wheel with a hole instead of a tit,

The voltage would be high until the sensor saw the hole.

Use an inverter chip before the CDI or MaxiMite permitting
triggering on the negative pulse.

Probably adds more issues or trading one set of problems for
another.

Joe Berki

That is not how they work. They work on a change in magnetic
properties. They might work with a hole. Make a test plate
and chuck in a drill motor. If you have a scope you will see what
the pulse, if any, looks like. Take a picture of the scoop face.

The best thing is get a water jet company to make the plate
as you need the elongated mounting holes for timing adjustments.

Your email editor is inserting blank lines between sentences
for some strange reason :-)


Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.