Subject: Low cost home depot angle bracket CAS holder
From: paul lamar
Date: 9/25/2017, 3:08 PM
To: A10-Me-Earthlink



This bracket uses angle aluminum from home depot.

You don't need a mill to make it.

Works best with Hall effect sensors as they are super
small and light weight.

The second best is anti lock wheel sensors.

  The stock Mazda sensors are larger and heavier.

For printed circuit boards I use a company called
Express PCB. Been using them for at least 15 years.

They have a free PCB editor I have been using for years.
So if you get that I can help you learn it.
It is rather simple. The editor is free.

https://www.expresspcb.com/free-cad-software/

About $50 for three 2 x 3 PCB's

9 PC boards total
----------------------------------------------
The Hall effect sensors PC board will look something like this.
It is 3.7 inches between the sensor so the aluminum disk
holding on tiny magnet will be about 4.1 inches in diameter.

Paul Lamar

 The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.