Subject: Electric oil pump and coolant pump power requirement
From: paul lamar
Date: 9/29/2017, 5:54 PM
To: A10-Me-Earthlink


 Paul, and group

 We are thinking of building a 13B engine for our airplanes  and
 possibly for my helicopter project.

 We are contemplating using an electric coolant pump and also an
 electric oil pump.

 We were thinking of using the Toyota MR2 power steering pump for oil,
 and some other, like a Messiere type pump for the coolant.

 Do you know the power requirements for these two pumps?

 We have already used an MR2 oil pump for our electric car project.

 Zoltan Szakaly and Mark Szakaly

Yes and an electric cooling pump is a bad joke.
It takes 3 HP to cool a rotary.  2,250 watts
at 12 volts that is  187 AMP!!!!!
The fuse on a Mezziewr is 20 amps. Good luck :-)

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.