Paul, and group
We are thinking of building a 13B engine for our airplanes and
possibly for my helicopter project.
We are contemplating using an electric coolant pump and also an
electric oil pump.
We were thinking of using the Toyota MR2 power steering pump for oil,
and some other, like a Messiere type pump for the coolant.
Do you know the power requirements for these two pumps?
We have already used an MR2 oil pump for our electric car project.
Zoltan Szakaly and Mark Szakaly
Yes and an electric cooling pump is a bad joke.
It takes 3 HP to cool a rotary. 2,250 watts
at 12 volts that is 187 AMP!!!!!
The fuse on a Mezziewr is 20 amps. Good luck :-)
Paul Lamar
Thank you for your quick response.
You have answered my question regarding the coolant flow requirement.
But what is the necessary oil pressure and oil flow requirement?
What is the meaning of the colors on your coolant flow diagram?
Zoltan Szakaly
I forgot where that chart came from. It appears to be for different size
engines.
I would encourage the use of an off the shelf dry sump oiling systems
driven by the e-shaft. The higher the oil pressure the better.
We have about 125 psi to 150 psi in the TTC engine which drops off to 80
psi for some
strange reason at 10,000 feet. I have not figured that out yet.
Oil temperature seems to be a factor. Oil squirter's cool the rotors.
Use mobile One or some other pure synthetic. Cook a sample
in a kitchen oven at 500 F for one half hour.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.