12 e

I'm using Megasquirt and I truly think it's the way to go. You don't
 need to learn C programming at all. It has an SDCard to catalog
(black box). The user interface program is called "Tuner Studios".
Mouse and a laptop to program your engine, very very user-friendly.
You can also use your android with bluetooth to tune. The open source
community of Mega squirt is amazing. It's more advanced then most car
manufactures ECM.

I'm actually going to develop a board with dual power supplies, that
a mega squirt can plug into. Will also handle EGT's, Wide-band, and
another handful of extra analog sensors onto of the mega squirt.
Since I'm using GRT (another great open source company) for my EFIS,
I send all the mega squirt data to appear on GRT screens. If Dynon,
MGL, give me their serial protocol, I can port the data to those
screens too.

- Matt Boiteau



Mat,

                I find this very interesting!  One glaring omission
from all ECU on the current market is a trim pot to alter the mixture
rapidly up to 2 points.  Tracy had this and SDS also have this. None of
the other do.  Can this be added??

Regards, Neil Unger.




The Rotary Engine free News Letter. Powered by Linux. If you want
off the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.