Subject: Lancair is not a certified aircraft 12 d
From: paul lamar
Date: 11/11/2017, 10:32 AM
To: A10-Me-Earthlink



    12 d

    Lycoming iE2

    https://www.lycoming.com/engines/ie2 <https://www.lycoming.com/engines/ie2>


    "Cruise at a set RPM and correct your air and fuel mixture with a
    single lever. Our single-lever controls allow you manage your mixture
    control and propeller control electronically so you can focus on
    what's ahead. The iE2 engine uses optimized and automatic fuel
    leaning for improved fuel efficiency during takeoff, climb and
    cruise."

    - Matt Boiteau

    Its an experimental home built.

    Good idea of Lycoming. Selling a non certified aircraft engine.

    Experimental home built's are 30 to 40 % of the market.

    Paul Lamar



    Yeah I talked to the lycoming rep I think it was at Oshkosh and they
     said there plan is to get it certified as well and sell it for both
     experimental and certified aircraft. It's a pretty sophisticated
    system I talked to mt buddy Kevin Eldridge that works for lancair at
     reno and he said its doing pretty good.

    Jacob Sturges



    Its been doing good for years. The FAA has a problem. How is an IA
    going to check it out? Where are they going to find IA's that know
    about computers.

    Paul Lamar


   the website doesn’t say what the engine costs….what does it cost?…further is it more expensive than a fully modified turbo 13b…..just because it isn’t liquid cooled why would i want one? What is the operating cost per hour?  An O320 is $100 per hour….is that what you really want to pay going forward…a 13b isn’t nearly that cost.
   Byron Head



     I am all for engine conversions, rotarys, efi, ect. It breeds innovation and is great for aviation.  There are plenty of reasons to do a engine conversion, horsepower, cool factor, r&d for a turn key set up to maybe bring the cost down by semi mass production, and plus its just fun, but the reality is cost is not it. Let's be realistic a rotary conversion is not cheaper than a o-320 as much as I like it and wish it was it's not.

The initial cost is almost always higher than buying a used low time lycoming, most private pilots will never fly enough hours for the rotary to pay for itself, and not to mention if your time is worth anything you will have 5 times the amount of labor in it and trial and error than you would in a lycoming, not that that's not fun that's why I love experimental aviation.


I am all for it and want to do one myself  but saving money is not the reason for it, I bet no one can show me  a price breakdown that proves this wrong.  Being experimental a person can build a experimental 320 pretty darn cheap. I am excited about everything you all are doing and love seeing the rotarys fly, but in my opinion the development stage they are currently in,  is not a more cost effective alternative for the average pilot. Hopefully with all the work you all are doing that could change soon.
Thanks, Jacob Sturgis

You better take it apart and magnaflux the crank and rods.
My 1500 hour O-470 crank was a mass of cracks.

Even if it has been overhauled you could get a new crack at any time.
The only really safe think is new cranks and rods.

Paul Lamar


    The Rotary Engine free News Letter. Powered by Linux. If you want
    off the list PLEASE let me know and I will remove  you.  ACRE NL web
     site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
    Copyright 1998-2017 All world wide rights reserved.