1002 12


The Rotec/Ellison carb is quite expensive at over $300 as I recall.
If you have a lathe and a mill you can make your own side draft 2 barrel car using a low cost Holly float bowl.

This is designed to work with a two rotor P-port and slide throttle.

Here are some 3D's.

A  marine outboard engine has a self contained ignition system. It does not require a battery or  alternator or voltage regulator.

One or more of these devices that can fail and cause the engine to stop if you are using an EFI and automotive the ignition. The TTC has given us trouble for that reason. If the battery gets low the EFI and the ignition fail to work.

A certified aircraft engine does not need these to parts to keep running as the magneto is self contained ignition and of course most use carburetors or mechanical injection.


Paul Lamar


Paul,

Is the McNealey leaning kit available?

Joe Berki

Haven't checked lately. It is easy to make one.


Joe  add your add your questions or comments  at the end of the thread. Not the begging.
I going to enforce that rule. If people don't do that it will not be forwarded.
My ISP changed the rules.


Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.