12 g
Lycoming iE2
https://www.lycoming.com/engines/ie2
<
https://www.lycoming.com/engines/ie2
"Cruise at a set RPM and correct your air and fuel mixture with a
single lever. Our single-lever controls allow you manage your
mixture control and propeller control electronically so you can focus
on what's ahead. The iE2 engine uses optimized and automatic fuel
leaning for improved fuel efficiency during takeoff, climb and
cruise."
- Matt Boiteau
Its an experimental home built.
Good idea of Lycoming. Selling a non certified aircraft engine.
Experimental home built's are 30 to 40 % of the market.
Paul Lamar
Yeah I talked to the lycoming rep I think it was at Oshkosh and they
said there plan is to get it certified as well and sell it for both
experimental and certified aircraft. It's a pretty sophisticated
system I talked to mt buddy Kevin Eldridge that works for lancair at
reno and he said its doing pretty good.
Jacob Sturges
Its been doing good for years. The FAA has a problem. How is an IA
going to check it out? Where are they going to find IA's that know
about computers.
Paul Lamar
the website doesn’t say what the engine costs….what does it
cost?…further is it more expensive than a fully modified turbo
13b…..just because it isn’t liquid cooled why would i want one? What
is the operating cost per hour? An O320 is $100 per hour….is that
what you really want to pay going forward…a 13b isn’t nearly that
cost. Byron Head
I am all for engine conversions, rotarys, efi, ect. It breeds
innovation and is great for aviation. There are plenty of reasons to
do a engine conversion, horsepower, cool factor, r&d for a turn key
set up to maybe bring the cost down by semi mass production, and
plus its just fun, but the reality is cost is not it. Let's be
realistic a rotary conversion is not cheaper than a o-320 as much as
I like it and wish it was it's not.
The initial cost is almost always higher than buying a used low time
lycoming, most private pilots will never fly enough hours for the
rotary to pay for itself, and not to mention if your time is worth
anything you will have 5 times the amount of labor in it and trial
and error than you would in a lycoming, not that that's not fun
that's why I love experimental aviation.
I am all for it and want to do one myself but saving money is not
the reason for it, I bet no one can show me a price breakdown that
proves this wrong. Being experimental a person can build a
experimental 320 pretty darn cheap. I am excited about everything you
all are doing and love seeing the rotarys fly, but in my opinion the
development stage they are currently in, is not a more cost
effective alternative for the average pilot. Hopefully with all the
work you all are doing that could change soon. Thanks, Jacob Sturgis
You better take it apart and magnaflux the crank and rods. My 1500
hour O-470 crank was a mass of cracks.
Even if it has been overhauled you could get a new crack at any
time. The only really safe think is new cranks and rods.
Paul Lamar
OK, now look at the late 19th century and very early 20th century.
Small reciprocating engines were being developed. What was the cost
of development then compared to a horse and carriage? Same thing,
different era. Recip engines have about 150 years of development
behind them. Care to estimate man hours studying and developing
them.
Many manufacturers stepped up in the 1960's to investigate and
develop rotary engines. One by one they fell by the wayside except
little Toyo Kogyo Motors. At this time there is about 60 years
development and compared to recip engines, minimal man hours doing
R&D. After all those manhours of recip R&D they still break
crankshafts and conn rods. Mazda has had no e-shaft structural
failures to date. Failures have been due to oiling issues or over rev
which causes oiling issues.
Dale Davies
The topic was cost not reliability, I just said there's tons of
reasons to go for a rotary and I am with everyone on that, its just
cost is not one of them and that's not a huge deal for everyone I
would be willing to pay more, not everyone in aviation is trying to
save every penny, and if they are from my experience there playing in
the wrong field. It can be done on a budget but all it takes is one
problem to wipe your budget out.
I think a lot of you guys defiantly have the brains for it and have
all ready designed and flown plenty of viable engine packages I just
think in order to get the cost down cheaper than a lycoming, someone
would need to be producing the parts like, intake, ecu, gearbox,
engine mounts, ect all the things you guys designed yourself, in
large enough batches to get the cost down and the labor down for the
average builder to get more in the sky's. I know that takes a large
investment, money and time and like you said the piston engine has
alot more behind it, so I imangine its tough to find the big funding
needed to get a streamlined engine package. I just think there is a
lot more people that would run a rotary but are too overwhelmed or
lack some of the knowledge to do it on there own. Let me be clear I
am not against the rotary and love to see people doing them.
I want basically the TTC engine on av gas at 350 to 400 hp with maybe
2 ms3pro computers I am not sure yet there, I am watching what
everyone's doing to reliably control fuel and spark and keeping up on
the newsletter, that is if I don't get kicked off. Lol. I know I
stirred the pot a little there. Thanks, Jacob Sturgis
Car gas is a dollar a gallon lower cost and you will be running 10 to
12 gallons an hour. One of the reasons I don''t fly my C182 anymore
it cost about $500 or more to fill it up. It only has 50 hours on a
reman with a 2000 hour TBO.
Paul Lamar
Jacob,
In reality you have raised a very pertinent point in
what is a very big topic. Ultimate cost of a rotary conversion. First
we must be sure we are comparing "apples with apples". A second hand
Lycoming is nothing like a second hand Rotary. Reliability--- The lyc
is a hand grenade waiting to destroy your whole day. I have heard of a
bloke who put a $500 rotary in his aircraft, and is still flying!! Not
sure I am that courageous, but similar to a cheap second hand Lyc. The
real problem with conversions is the lack of a FWF package. The builder
has spent 2000 hours of weekends building his plane, and now--- ARGH
he has to start again on the engine! It is much simpler to do a cheque
book build and buy a lyc FWF package. The majority of builders do
cheque book the engine, and who can blame them, the idea is to be flying
and not eternally building.?
Paul has spent his life promoting the rotary in aircraft, yet the
uptake is in reality minimal. Cost is not the problem , it is
uncertainty of the unknown on the builders part and as I said TIME.
That is why there are rumblings in OZ between a few builders who have
"been there , done that" and realise that the impediment to the rotary
is the lack of the FWF package. These blokes are slowly working towards
the possibility of a FWF package for resale. Is to be based on the 13B
with a turbo option. Alloy end plates may also be affordable if they
can be sold in enough numbers. While I am not privy to the intimate
discussions, the costs are along the lines --- Engine $2500. Strip and
rebuild, $2500. P port $1000, Intake runners $500, Oil and fuel pipes
$500. PSRU $6500 (3.17). Exhaust $1500, Heat exchangers, $1500,
Basic cowl, $1000. Engine mount $1000, ECU, $2500. Yep that is
approx with figures on the back of a postage stamp of $21,000 total AUD
or $15750 USD. There are areas for obvious savings with jigged
construction, but is this a proposition for say 220 HP? Unfortunately
nothing is free anymore.
Neil Unger.
I think the problem is most people are not mechanical engineers.
They are not familiar with engine design.
The life of the rotary, with Silicon Nitride apex seals, is ten times
the life of a piston engine and the power to weight ratio is
three times better.
Acceleration equals horsepower over weight so the rotary
will eventually dominate all forms of mobile devices. Several
like drag racing and road racing have already occurred.
This a law of physics. It is not just an idea or opinion. It is THE LAW :-)
Now I might be dead before this happens because our schools
in the US never teach physics :-)
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.