12
Paul,


Is the diameter of the passage indicate on the attachment the same diameter
as Tom's leaning kit?  Would it be appropriate for a venture to be added to
the center of each inlet?  Holley makes venture booster for its racing
carbs.  Is there a recess passage for fuel to run around the perimeter of
the inlets?  Would the clamping method be prone to leaking?  Can the float
bowl be higher than the inlets? Thanks Joe Berki


All the passages in the Holly are the same as the leaning kit..

The clamping method are screws. The same as the Holly carb.

You can add an aux  venture if you want but the opening is a venture,

The recess is to fit the 2 inch intake runner. It is tig welded.

Paul Lamar


Please  add your questions or comments  at the end of the thread.
Not the beginning.

I am going to enforce that rule. If people don't do that it will not be
forwarded. My ISP changed the rules.

Paul Lamar

Hi Paul,
   Is this where to put our questions or comments ? I assume by "not
the begging" you mean "not the beginning".

Cheers Chris Hoskins.

Yes Chris that is good. This goes back long before smart  cell phones.
20 years. Each email program for an android phone is different.
So is the Apple email program. Thunder Bird is about the same going on 25 years.
So too the Windows email program.

About 10 or 12 years ago we tried it the other way. Nobody like
it. If you do it this way it is in chronologically  correct.

It will work with a cell phone. I tried it with gmail on my android.

Cell phones are not suited to this type of work. I have about 2 gig of
files on my desk top computer. Email of a cell phone is not much
more than texting.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off the
list PLEASE let me know and I will remove  you.  ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas Copyright
1998-2017 All world wide rights reserved.