12
The Holly bowl is wider than the space between the p-ports so
you must fabricate S turns. An S turn can be made from a ninety degree
bend. Cut it apart at 45 degrees rotate one part 180 degrees and weld
them back together.

BTW I have some prefabricated slide throttles kits  that I will sell
for $50. Slide throttles give the lowest fuel burn for a given
power and that is why Mazda used them on all early racing
engines and the Le Mans winning engine.

This is a quick and low cost way to get your rotary running. Easy to under stand
and tune.

If you don't have access to a tig welder you can send the parts to
me and my tig welder is superb and of reasonable cost.

He just re-welded the up dated TTC dry sump system for me.

Paul Lamar


------------------------------------------------------------------
Please  add your questions or comments  at the end of the thread.
Not the beginning.

I am going to enforce that rule. If people don't do that it will not be forwarded.
My ISP changed the rules.

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.