12
I am really seriously considering building a nice turbo 13b for
the rv6 with aluminum end housings, but I really needs some questions
answered first please. I believe it's too heavy without the aluminum
housings I moved one the other day and almost broke my back! Felt much
heavier than I expected. So i have a few important questions only you
guys can probably answer because everything I find online is all over
the place, it's full of misinformation.
First what is a real life typical 13b engine with stock iron
housings weigh configured for aircraft use, so including gear box,
radiator, and accessories, wet cause I know there's a good 20 to 35
pounds of water needed, everything needed to make it run. So i am
looking for real world firewall forward engine configurations actual
weight turbo and non turbo, and how much weight we can save with
aluminum housings. I am sure you or someone on here knows. Just from
what little I can find online it seems too heavy compared to a 360
lycoming by the time you get the gear box, cooling and accessories on
there without going with aluminum housings, but lighter than a 540.
Second EGTs I saw the graphs from that 2 rotor the other day and it
said 2300 degrees is that correct if so I think we would defiantly want
a inconel header, exhaust housing, turbine wheel and a good heat shroud
for the cowl.
Third, gear box I keep seeing everyone making there own couplings,
where are they getting the rest of the prsu the planateries and housings
and stuff. I cant find anything online. Does anyone make a reliable prsu
ready to go and does anybody have one with a constant speed hub. We
would be willing to pay the extra money for a nice gear box with
constant speed capabilities.
Also Paul I'll be free in the next couple weeks and would love to
get together and go over this stuff we have a few planes that would be
great candidates for a rotary. Also where can I buy your book I think
most auto engine conversions cruise speed is a little slower than
similar horsepower lycomings in the same airframe and I believe some of
it is due to having a fixed pitch prop but I believe it to mostly be
cooling drag. I imagine it will take some trial and error to get a
efficient cooling system designed with minimal drag. Our rv6 cruises at
181 knots @7500 ft on 11.9 gallons per hour, so it does pretty good but
it is time for a new engine and it would be depressing spend all that
time, work, and money and go slower.
Thanks, Jacob Sturges
FWF the same as a lycoming.
EGT's 1400F (RX8 side exhaust.) The rest up to 1800 F. Mostly 1500 F
depends on where you measure it.
The only guy working on gear boxes right at the moment is in Oz.
Neil Unger. The Ford planetarium are starting with the C6 to E4OD
rear planet. Slauson Transmission Parts in LA.
If you have a machine shop it would be a good long term biz.
I would be available for consulting at $100 and hour.
Paul Lamar
------------------------------------------------------------------
Please add your questions or comments at the end of the thread.
Not the beginning.
I am going to enforce that rule. If people don't do that it will not be
forwarded.
My ISP changed the rules.
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.