12

Paul,

I have a new Holley 500 and Tom’s mixture kit so I will start on a plenum beneath the carb and attach the runners and remove the slide throttle.  I will also need to get a mixture control cable.  I was going to use the MSD boxes and coils to fire the plugs using the two sensors that I installed on the front cover.  Thinking about  using a test stand to fire this experiment off.  I guess the next thing would be to use an ignition system that does not require external power but I would still be dependent on electric fuel pumps.

Joe Berki


------------------------------------------------------------------
Please  add your questions or comments  at the end of the thread.
Not the beginning.

I am going to enforce that rule. If people don't do that it will not be forwarded.
My ISP changed the rules.

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.