Has anyone wired their ignition system?  I have been looking at the various wiring scenarios for the use of the MSD boxes and would like to choose the correct configuration.  I have 2 sensors. One for the front rotor and one for the rear rotor.  2 MSD boxes connected to each sensor would fire the leading plug for each rotor.  How is the trailing plugs connected? Using 4 coils. Would you parallel the leading plug coil primary with the trailing plug coil primary firing leading and trailing plugs for each rotor at the same time?

Thanks, this is confusing Joe Berki




https://www.msdperformance.com/blog/custom_diagrams/1/

Paul Lamar

------------------------------------------------------------------
Please  add your questions or comments  at the end of the thread.
Not the beginning.

I am going to enforce that rule. If people don't do that it will not be forwarded.
My ISP changed the rules.

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.